Generation of light-induced electrical potential from ion exchange membranes containing 4,4′-bipyridine moiety. II. Effect of species of anion exchange membranes on photovoltage

Various anion exchange membranes containing the 4,4′-bipyridine moiety as anion exchange groups were prepared from membranous copolymers of chloromethylstyrene and divinylbenzene and membranes of chloromethylated polysulfone and 4,4′-bipyridine. After evaluating the electrochemical properties of the obtained anion exchange membranes, the effect of membrane species on the generation of a photovoltage was examined by irradiation using a xenon lamp. The membranes swelled with ethylene glycol were clamped between two ITO electrodes and sealed by adhesive. The generated photovoltage and photocurrent from about a 120 μm thick membrane were about 80 mV and 400 nA, respectively, in a 200K Ω load resistance, though dependent of membrane species. The voltage decreased with increasing crosslinking by the divinylbenzene in the copolymer membranes. The effect of counter ion species on the voltage was examined and a chloride ion form of membrane showed the highest photovoltage. The membranes with different thicknesses, which were prepared from polysulfone derivatives, were evaluated and the voltage decreased with decreasing thickness. Even a porous membrane from polysulfone derivatives showed a photovoltage though a porous membrane in which a methyl viologen ethylene glycol solution had been impregnated did not have a stable voltage. Also, the anion exchange membrane containing the benzyl trimethylammonium moiety, which is the conventional anion exchange groups, did not show a high and stable photovoltage upon photoirradiation. © 1996 John Wiley & Sons, Inc.