首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于多芯片封装的半导体激光器热特性
引用本文:王文,褚金雷,高欣,张晶,乔忠良,薄报学.基于多芯片封装的半导体激光器热特性[J].强激光与粒子束,2014,26(1):011015.
作者姓名:王文  褚金雷  高欣  张晶  乔忠良  薄报学
作者单位:1.长春理工大学 高功率半导体激光国家重点实验室, 长春 1 30022;
基金项目:国家自然科学基金项目(61177019, 61176048); 吉林省科技发展计划项目(20120361)
摘    要:设计了一种由12只单条形芯片分为2组以从高到低阶梯排列的百瓦级半导体激光器结构。针对其在稳态工作条件下的热特性利用ANSYS软件进行了模拟分析,通过改变Cu热沉的宽度、间距和高度差,得到了最高和最低Cu热沉封装的芯片有源区温度及两者温度差值的变化规律。最后设计了一种较为理想的百W级半导体激光器的散热结构。

关 键 词:多芯片    半导体激光器    稳态    有源区温度
收稿时间:2013-07-02;

Thermal characteristics of semiconductor laser based on muti-chip packaging
Wang Wen,Chu Jinlei,Gao Xin,Zhang Jing,Qiao Zhongliang,Bo Baoxue.Thermal characteristics of semiconductor laser based on muti-chip packaging[J].High Power Laser and Particle Beams,2014,26(1):011015.
Authors:Wang Wen  Chu Jinlei  Gao Xin  Zhang Jing  Qiao Zhongliang  Bo Baoxue
Institution:1.National Key Laboratory on High Power Semiconductor Lasers,Changchun University of Science and Technology,Changchun 130022,China;2.Institute of Optoelectronic Technology,China Jiliang University,Hangzhou 310018,China
Abstract:A hundred-watt semiconductor laser packaged with 12 single strip-type chips divided into 2 groups where each group was set from high to low in ladder form was designed, and its thermal characteristics under steady-state work were analyzed by ANSYS. The temperature of active region of chip packaged with the highest and the lowest Cu heat sinks was obtained by changing the width, spacing and height difference of Cu heat sink, and thus the change rules of the temperature difference were derived. Finally, we designed a relatively ideal heat dissipation structure for hundred-watt semiconductor laser.
Keywords:semiconductor laser  steady-state  temperature of active region
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号