首页 | 本学科首页   官方微博 | 高级检索  
     检索      

组合曲线回归法计算螺旋扁管管内对流传热系数
引用本文:杨胜,张莉,徐宏,曾宪泰.组合曲线回归法计算螺旋扁管管内对流传热系数[J].低温与超导,2011,39(7):69-73.
作者姓名:杨胜  张莉  徐宏  曾宪泰
作者单位:化学工程国家重点实验室,华东理工大学,上海200237
基金项目:上海市自然科学基金,中央高校基本科研业务费专项资金资助
摘    要:针对螺旋扁管壁面温度难于准确测试的特点,提出采用线性曲线回归与非线性曲线回归相结合的方法进行管内传热系数计算.进行了光管与螺旋扁管管内对流传热实验,并用该方法计算管内对流传热系数.光管传热系数计算值与经典公式的大偏差小于6%.螺旋扁管管内传热系数的计算值略大于通过测量壁温获得的传热系数值,分析了二者存在差异的原因.组合...

关 键 词:曲线回归  传热系数  螺旋扁管  壁温测试

Combined curvilinear regression method for calculating convective heat transfer coefficient in spiral flat tubes
Yang Sheng,ZhangLi,Xu Hong,Zeng Xiantai.Combined curvilinear regression method for calculating convective heat transfer coefficient in spiral flat tubes[J].Cryogenics and Superconductivity,2011,39(7):69-73.
Authors:Yang Sheng  ZhangLi  Xu Hong  Zeng Xiantai
Institution:(State Key Laboratory of Chemical Engineering,East China University of Science and Technology,Shanghai 200237,China)
Abstract:In consideration of the difficulty in measuring the wall temperature of spiral flat tubes accurately,a linear-nonlinear combined curvilinear regression method was introduced to calculate the heat transfer coefficient in tubes.The inside tube convective heat transfer experiment of round tube and spiral flat tube was conducted and the method was utilized to calculate the tube side heat transfer coefficient.The calculated heat transfer coefficient of a round tube had a 6% deviation with the value by classical computing formula.The calculated heat transfer coefficient of spiral flat tubes was slightly larger than the valve obtained by measuring the wall temperature,and the reason of the difference was analyzed.The combined curve fitting method can eliminate the error caused by wall temperature measurement and further improve the accuracy of test results.
Keywords:Curvilinear regression  Heat transfer coefficient  Spiral flat tube  Wall temperature measurement
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号