Morphology-property relationships in polycarbonate-based blends. I. Modulus

The tensile, dynamic mechanical and morphological properties of PC/HDPE, PC/LDPE and PC/PS blends have been investigated with the intent of clarifying the major factors governing the modulus of these essentially incompatible blends. Scanning electron microscopy shows that all of the PC/HDPE, PC/LDPE and PC/PS blends have a domain structure whose morphology is strongly dependent on the concentration of the dispersed phase; when the dispersed phase concentration is less than 15%, the domains are mostly of spherical shape, while above 20% agglomeration takes place to form rodlike structures. Dynamic mechanical data shows there is essentially no adhesion at the PC-HDPE and PC-LDPE boundaries, while there is appreciable adhesion at the PC-PS interface. The existence of an intermixed zone was postulated to explain this interfacial adhesion. Morphological and thermal analysis results also indicate that both the HDPE and LDPE inclusions are loosely sitting in the holes in the PC matrix while the PS inclusions are compactly embedded in the PC matrix. These differences in boundary nature give marked effects on the tensile properties including the modulus. For the modulus, PC/HDPE and PC/LDPE blend systems can be regarded to be mechanically equivalent to a PC matrix alone with holes in it when the dispersed phase concentration is lower than 15%, while in the case of PC/PS blends the PS inclusions contribute substantially to the sample's overall modulus.