Influence of load amplitude and uniaxial tensile properties on fatigue crack growth

The rate at which energy is accumulated within a unit volume of material in fatigue is assumed to depend not only on load-time history but also on the specimen size and geometry in addition to material type. A threshold level for the hysteresis strain energy density function accumulated in the material is used for predicting macrocrack growth. This is accomplished by application of the incremental theory of plasticity for each increment of crack growth. The accumulated hysteresis strain energy density factor ΔS to crack growth increment Δa ratio is found to be constant for fixed specimen size and loading, i.e., . Results are obtained for the cylindrical bar specimens with a penny-shaped defect at the center subjected to a constant amplitude and frequency loading. The resistance curves in the ΔS versus Δa plot are parallel lines as specimen size is altered. This information provides a rational means for predicting the influence of specimen size on fatigue lifetime.The results are also compared with those found for geometrically similar plate specimens with line cracks. Cylinder bar specimens of the same material are found to sustain more load cycles prior to catastrophic failure.