首页 | 本学科首页   官方微博 | 高级检索  
     

W波段回旋行波管输入输出段的改进设计
引用本文:熊武健,王丽,罗勇,刘国. W波段回旋行波管输入输出段的改进设计[J]. 强激光与粒子束, 2013, 25(3): 693-698. DOI: 10.3788/HPLPB20132503.0693
作者姓名:熊武健  王丽  罗勇  刘国
作者单位:1.电子科技大学 物理电子学院, 成都 61 0054
摘    要:
在回旋行波放大器的设计中,输入输出段的性能直接影响到整管输出功率、效率及增益。设计了一种采用渐变过渡段的输入耦合器来减少电子注在前端的截获,而且略微地提高了耦合特性,有效带宽达到4.06 GHz。采用二级切比雪夫渐变波导作为输出结构的耦合输出段,从仿真结果得到,在整个工作频段内,该结构中TE01工作模式的反射低于-20 dB,TE01模向杂模TE02和TE03的耦合分别在-20 dB和-30 dB以下。

关 键 词:回旋行波管   输入耦合器   渐变过渡段   耦合输出段   二级切比雪夫渐变
收稿时间:2012-06-22

Improved design of input and output structures of W-band gyro-TWT
Xiong Wujian,Wang Li,Luo Yong,Liu Guo. Improved design of input and output structures of W-band gyro-TWT[J]. High Power Laser and Particle Beams, 2013, 25(3): 693-698. DOI: 10.3788/HPLPB20132503.0693
Authors:Xiong Wujian  Wang Li  Luo Yong  Liu Guo
Affiliation:1.School of Physical Electronics,University of Electronic Science and Technology of China,Chengdu 610054,China
Abstract:
An improved input coupler with tapered transitional section and output structure adopting cascaded Chebyshev waveguide, working in TE01 mode, has been designed for W band gyro-TWT. By means of theoretic analysis and numerical computation in Matlab,the outer radius, the length of input couplers cavity and two contours of the section of coupling output are obtained. According to the optimized results in HFSS, the bandwidth of the improved input coupler which meets the demand of S11 less than -20 dB and S21 greater than -0.1 dB is 4.06 GHz. The cascaded Chebyshev structure has good performance on transmitting TE01 mode and suppressing spurious modes with acceptable length.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号