On the propagation of elastic waves through composite media II |
| |
Authors: | Ir. H. A. Waterman |
| |
Affiliation: | (1) Centraal Laboratorium TNO, Delft, Netherlands;(2) Present address: Fysisch Laboratorium der Rijksuniversiteit, Westersingel 34, Groningen, Niederlande |
| |
Abstract: | Summary The propagation of elastic waves (both longitudinal and transverse) through polyurethane rubbers filled with different amounts of sodium chloride particles was studied at 0.8 MHz and 5 MHz. At a constant filler concentration (∼10% by volume), the velocity of these waves appeared to be independent of filler size. On the other hand, both velocities were found to increase with filler content. From the wave velocities, the effective modulus for longitudinal waves, L, bulk modulus, K, and shear modulus, G, were calculated according to the relations for a homogeneous isotropic material. All three moduli appear to be monotonically increasing functions of filler content, c, over the whole experimentally accessible temperature range (−80°C to +80°C for L and K; −80°C to about −30°C for G) and they, moreover, reflect the glass-rubber transition of the binder. Poissons ratio, μ, was found to decrease with increasing filler content and shows a rise at about −30°C as a result of the approach of the glass-rubber transition. The attenuation of the elastic waves was also measured in the temperature ranges mentioned. For filler particles beyond a critical size both tan δL and tan δG in the hard region are independent of the filler content within the accuracy of the measurements. The critical size depends on the type of wave and on its frequency. In the rubbery region, however, tan δL increases with particle size (at a constant content of 10% by volume) and even shows an enhancement with the smallest particles (1–5 μ) at 0.8 MHz. Moreover, it is found that for the same filler size tan δL increases with filler content. In some cases an anomalous damping behaviour was found, such that in the rubbery region the attenuation rises indefinitely with temperature. For filler particles larger than the above-mentioned critical size, tan δG and tan δL increase in the hard region as well. Finally, the experimental results are compared with existing theories on the elastic properties of and wave propagation through composite media. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|