Preparation, properties and structures of the first series of organometallic Pt(II) and Pt(IV) complexes with stibine co-ligands

The planar Pt(II) monomers PtMe2(L-L)] and (PtMe2)2(L'-L')2] dimers (L-L = R2Sb(CH2)3SbR2, o-C6H4(CH2SbMe2)2; L'-L' = R2SbCH2SbR2; R = Me or Ph) are obtained in good yield via reaction of PtMe2(SMe2)2] with L-L or L'-L' in benzene. The Pt(iv) stibines, PtMe3(L-L)I] (L-L = R2Sb(CH2)3SbR2, o-C6H4(CH2SbMe2)2 or 2 x SbPh3, SbMePh2 or SbMe2Ph) are obtained by treatment of PtMe3I] with L-L in chloroform. These represent the first series of stable Pt(IV) stibine complexes. All of the products have been characterised by 1H, 13C{1H}, 195Pt NMR spectroscopy, electrospray mass spectrometry and analysis. Crystal structure determinations on PtMe3{R2Sb(CH2)3SbR2}I], PtMe3{o-C6H4(CH2SbMe2)2}I] and PtMe3(SbPh3)2I] confirm the distorted octahedral environment at Pt, with fac Me groups and mutually cis Sb donor atoms. The Sb-Pt-Sb angle in the seven-membered chelate ring of the o-C6H4(CH2SbMe2)2 complex is ca. 96 degrees , compared to <90 degrees in the complexes with six-membered chelates. The C1-distibines R2SbCH2SbR2 afford only the dinuclear (PtMe3)2(mu-R2SbCH2SbR2)(mu-I)2] in which the stibine ligand and two I atoms bridge two Pt atoms giving an edge sharing bioctahedral geometry which has been confirmed by a crystal structure analysis. The Pt(II) species undergo oxidative addition with MeI to give the corresponding Pt(IV) species, while the Pt(IV) species reductively eliminate ethane upon thermolysis.