| Abstract: | A simulation model has been developed to predict the partitioning behavior of styrene in dispersion polymerization in ethanol–water mixtures. The composition of both the continuous phase and the dispersed phase are quantitatively estimated throughout the polymerization process. The presence of water in the system causes a considerable increase of the styrene partitioning in favor of the particles. Thus, at 70°C and for an initial composition of ethanol/water/styrene = 63.3/26.9/9.8, the concentration of styrene in the particles is about 4.8 times higher than that in the serum instead of about one in pure ethanol. The higher the polymerization temperature, the lower the styrene concentration in the particles; the higher the initial styrene concentration, the higher the styrene concentration in the particles, whereas the partition coefficient is not largely effected. In contrast, neither the interfacial tension nor the final particle size do significantly alter the simulation results. The predicted data from this model have been successfully applied to clarify the mechanisms involved in dispersion polymerization, in terms of stabilization and of kinetic events. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 325–335, 1998 |
