首页 | 本学科首页   官方微博 | 高级检索  
     检索      

用于高功率微波器件的永磁体的设计和测试
引用本文:胡祥刚,宋玮,李兰凯,李小泽,朱晓欣,谭维兵,张立刚,沈志远,宁齐,梁旭.用于高功率微波器件的永磁体的设计和测试[J].强激光与粒子束,2016,28(3):033017.
作者姓名:胡祥刚  宋玮  李兰凯  李小泽  朱晓欣  谭维兵  张立刚  沈志远  宁齐  梁旭
作者单位:1.西北核技术研究所 高功率微波技术重点实验室, 西安 71 0024;
摘    要:报道了用于高功率相对论返波管振荡器的永磁体的设计和试制。以Halbach阵列结构为基础, 通过选择高性能的永磁材料, 调整磁钢的充磁方向、排列方式和尺寸, 优化设计了可用于某相对论返波管振荡器的永磁体结构, 其均匀区磁场强度0.98 T。采用粒子模拟方法, 进行了永磁体与返波管振荡器的一体化设计, 设计结果表明:器件输出功率超过1 GW, 设计的永磁体能够满足器件对磁场强度和位形的要求。对永磁体进行了试制和测试, 测试结果为:均匀区磁场0.88 T, 均匀区长110 mm, 磁体重量约306 kg。

关 键 词:高功率微波    相对论返波管    Halbach阵列    永磁体
收稿时间:2015-09-14

Design and test of permanent magnet used in high power microwave devices
Institution:1.Northwest Institute of Nuclear Technology,P.O.Box 69-13,Xi’an 710024,China;2.Institute of Electrical Engineering,Chinese Academy of Sciences,Beijing 100190,China
Abstract:A permanent magnet (PM) is one of the guiding magnet systems of high power microwave (HPM) sources. A relativistic backward wave oscillator (RBWO) packaged by the PM system has the advantages of compact structure, high efficiency and high repetition frequency. On the basis of the Halbach array, the theoretical design and the manufacture structure of the PM are proposed. The simulated magnetic flux density reaches 0.98 T, within a diameter of 50 mm. By employing the PIC simulation, the integrated design is carried out combining the PM and the RBWO. The output power of the RBWO is larger than 1 GW. Furthermore, the PM is manufactured and tested. The uniform length is 110 mm, the weight is 306 kg and the measured magnetic flux density is 0.88 T in center.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号