首页 | 本学科首页   官方微博 | 高级检索  
     检索      

射流式单重态氧发生器的气液两相耦合模型
引用本文:苏华,李守先.射流式单重态氧发生器的气液两相耦合模型[J].强激光与粒子束,2007,19(2):219-224.
作者姓名:苏华  李守先
作者单位:1. 中国工程物理研究院 研究生部, 北京 100088;2. 北京应用物理与计算数学研究所, 北京 100088
基金项目:国家高技术研究发展计划(863计划)
摘    要: 将气液两相耦合模型应用于射流式单重态氧发生器,通过数值模拟和实验的比较验证了该模型的可行性。分析了发生器工作参数对其动力学过程的影响,发现在保持其它参数不变的情况下,氯气和BHP溶液的相对浓度决定了发生器动力学过程的类型。给出了利用氯气吸收速率变化曲线判定发生器动力学过程类型的方法。在原有模型基础上考虑了热效应及其对模型参数的影响,计算了水蒸气的含量。模型改进后,模拟结果更接近于实验值。

关 键 词:射流式单重态氧发生器  气液两相耦合模型  数值模拟  热效应  水蒸气
文章编号:1001-4322(2007)02-0219-06
收稿时间:2006/9/25
修稿时间:2006-09-25

Two-phase model of jet singlet oxygen generator
SU Hua,LI Shou-xian.Two-phase model of jet singlet oxygen generator[J].High Power Laser and Particle Beams,2007,19(2):219-224.
Authors:SU Hua  LI Shou-xian
Institution:1. Graduate School of China Academy of Engineering Physics, P.O.Box 2101, Beijing 100088, China;2. Institute of Applied Physics and Computational Mathematics, P.O.Box 8009, Beijing 100088, China
Abstract:The two-phase model(TPM) is proved to be available in calculation of jet singlet oxygen generator(JSOG).The result of numerical simulation illustrates that the type of the generator kinetics is dependant on the relative concentration between chlorine and BHP,when the other parameters are fixed.An improved method determining the type of the generator kinetics by using the curve of chlorine absorption rate is presented.The TPM, including the thermal effect,could compute temperature and the fraction of water vapor.The results agrees with the experiment well.
Keywords:Jet singlet oxygen generator  Two-phase model  Numerical simulation  Thermal effect  Water vapor
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号