An analytical solution for the velocity and shear rate distribution of non-ideal Bingham fluids in concentric cylinder viscometers

An analytical solution is presented for the calculation of the flow field in a concentric cylinder viscometer of non-ideal Bingham-fluids, described by the Worrall-Tuliani rheological model. The obtained shear rate distribution is a function of the a priori unknown rheological parameters. It is shown that by applying an iterative procedure experimental data can be processed in order to obtain the proper shear rate correction and the four rheological parameters of the Worrall-Tuliani model as well as the yield surface radius. A comparison with Krieger's correction method is made. Rheometrical data for dense cohesive sediment suspensions have been reviewed in the light of this new method. For these suspensions velocity profiles over the gap are computed and the shear layer thicknesses were found to be comparable to visual observations. It can be concluded that at low rotation speeds the actually sheared layer is too narrow to fullfill the gap width requirement for granular suspensions and slip appears to be unavoidable, even when the material is sheared within itself. The only way to obtain meaningfull measurements in a concentric cylinder viscometer at low shear rates seems to be by increasing the radii of the viscometer. Some dimensioning criteria are presented.Notation A, B Integration constants - C Dimensionless rotation speed = µ/_y - c = 2µ - d = ₀²–2c_y - f() = (–₀)²+2c(–_y) - r Radius - r_b Bob radius - r_c Cup radius - r_y Yield radius - r₀ Stationary surface radius - r Rotating Stationary radius - Y₀ Shear rate parameter = /µGreek letters Shear rate - = (r_y/r_b)²– 1 - µ Bingham viscosity - µ₀ Initial differential viscosity - µ µ₀-µ - Rotation speed - Angular velocity - Shear stress - _b Bob shear stress - _B Bingham stress - _y (True) yield stress - ₀ Stress parameter = _B+µY₀ - _B-_y