| Abstract: | ![]()
The syndiotactic polystyrene (sPS) δ form was crystallized from mixtures with different compositions of p‐chlorotoluene–chlorobenzene (p‐CT–CB) and p‐chlorotoluene–1,1,2‐trichloroethane (p‐CT–TCE). The presence of the δ form and TTGG helical conformation was confirmed by Fourier transform infrared and wide‐angle X‐ray diffraction (WAXD) analyses. In sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes, the relative absorbance (RA) of the p‐chlorotoluene (p‐CT) solvent peak was very high even at very low concentrations of p‐CT in comparison with the RA of higher concentrations of chlorobenzene (CB) or 1,1,2‐trichloroethane (TCE) in the mixtures. However, the RAs of both CB and TCE solvent peaks decreased with decreasing concentrations of CB and TCE in the mixtures. A negligible decrease in the RA of the TTGG helical content was observed with a decreasing concentration of CB or TCE. The WAXD results showed that the 2θ peak positions of the [010] and [ 10] planes of the sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes appeared in the same position and were almost equal to those of the sPS–p‐CT δ‐form membrane. The mesophases of the sPS–p‐CT [p‐CT (A‐M)] and sPS–TCE [TCE (A‐M)] membranes were used for the sorption studies with different concentrations of various solvents. The sorption amount of aromatic solvents by both p‐CT (A‐M) and TCE (A‐M) mesophase membranes was higher than that of aliphatic solvents, regardless of the size, shape, and nature of the molecular cavity. The 2θ peak of the [010] plane of the sPS membranes slowly approached the original δ‐form value when the sPS mesophase membranes were immersed in various solvents of different concentrations for 48 h. The shifting of the 2θ peak of the [010] plane to the original δ form depended on the nature and concentration of the immersion solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2380–2387, 2005 |
