Tritium recovery from co-deposited layers using 193-nm laser

Recovery of tritium from co-deposited layers formed in deuterium–tritium plasma operations of the TFTR (Tokamak Fusion Test Reactor) was investigated by the use of an ArF excimer laser operating at the wavelength of 193 nm. At the laser energy density of 0.1 J/cm², a transient spike of the tritium-release rate was observed at initial irradiation. Hydrogen isotopes were released in the form of hydrogen-isotope molecules during the laser irradiation in vacuum, suggesting that tritium can be recovered readily from the released gases. In a second experiment, hydrogen (tritium) recovery from the co-deposited layers on JT-60 tiles that had experienced hydrogen-plasma operations was investigated by laser ablation with a focused beam of the excimer laser. The removal rate of the co-deposited layers was quite low when the laser energy density was smaller than the ablation threshold (1.0 J/cm²), but reached 1.1 μm/pulse at the laser energy density of 7.6 J/cm². The effective absorption coefficient in the co-deposited layers at the laser wavelength was determined to be 1.9 μm^-1. The temperature of the surface during the irradiation at the laser energy density of 0.5 J/cm² was measured on the basis of Planck’s law of radiation, and the maximum temperature during the irradiation decreased from 3570 K at the initial irradiation to 2550 K at the 1000th pulse of the irradiation. Received: 5 August 2002 / Accepted: 7 August 2002 / Published online: 28 October 2002 RID="*" ID="*"Corresponding author. Fax: +81-29/2825917, E-mail: shu@tpl.tokai.jaeri.go.jp