A pulsed EPR study of the catalytic oxidation of CO over Cu/SnO2

The role of the Cu(II) in the catalytic oxidation of CO over Cu/SnO₂ with low Cu(II) content was studied by continuous wave EPR, electron spin echo envelope modulation (ESEEM) and hyperfine sublevel correlation (HYSCORE) spectroscopes. Three methods were employed for introducing the copper: (i) by coprecipitation, (ii) impregnation onto SnO₂ gel and (iii) impregnation onto calcined SnO₂. Two types of Cu(II) species were identified in these calcined Cu/SnO₂ materials. Those belonging to the first type, termed B and C, exhibit highly resolved EPR spectra with well defined EPR parameters and are located within the bulk of the oxide. The other group comprises a distribution of surface Cu(II) species with unresolved EPR features and are referred to as S. While the latter were readily reduced by CO the former required long exposures at high temperatures (> 673 K). The specific interactions of the different Cu(II) species with CO were investigated through the determination of the¹³C hyperfine coupling of enriched¹³CO. The ESEEM spectra of calcined samples, generated either by coprecipitation or impregnation, show after the adsorption of CO signals at the Larmor frequencies of^{117, 119}Sn and¹³C and at twice these Larmor frequencies. Although these signals indicate that^{117, 119}Sn and¹³C are in the close vicinity of Cu(II), they cannot provide the hyperfine couplings of these nuclei. This problem was overcome by the application of the HYSCORE experiment. The 2D HYSCORE spectra show well resolved cross peaks which provide the hyperfine interaction of these nuclei. Simulations of the HYSCORE spectra yield for^{117, 119}Sn an isotropic hyperfine constant,a _iso, of ±4.0 MHz and an anisotropic component,T _?, of ±2.0 MHz. Pulsed ENDOR spectra also showed^{117, 119}Sn signals which agree with the above values. The¹³C cross peaks yielda _iso=±1.0 MHz andT _?=±2.0 MHz. Similar C cross peaks were observed in spectra of calcined Cu/SnO₂ after the adsorption of CO₂. Based on the same hyperfine couplings in the samples exposed to¹³CO and¹³CO₂ the signals were assigned to surface carbonate species generated by part of the Cu(II) S type species rather then by species B and the role of the Cu(II) in the oxidation process is discussed.