Modeling the influence of mineral content and porosity on ultrasound parameters in bone by using synthetic phantoms

Model composite media − 10×15×80 mm³ bone tissue phantoms based on an epoxy resin with fillers—were made to study the influence of porosity and mineral content on ultrasound velocity and attenuation. The pores were simulated by ∼ 1 mm³ particles of a soft rubber, while the mineral content was imitated by a mineral residue of natural bone obtained by burning and grinding. The porosity and mineral content were varied in the range of 0–70% by volume with a step of 10%. The velocity, attenuation, and prevalent frequency of ultrasound were measured by the pulse transition method, using transducers with nominal frequencies 0.1, 0.2, 0.5, and 1.0 MHz. It was experimentally found that the ultrasound velocity decreased nearly exponentially with growth in porosity, while the velocity dispersion was negligible at frequencies >0.2 MHz; the ultrasound attenuation increased linearly with growth in porosity and strongly depended on the frequency; the velocity increased nonlinearly with growth in mineral content above 40%; the attenuation did not exhibit a distinct dependence on the mineral content; the porosity provoked a shift in the prevalent frequency of transducers, tending to the common value of 0.2 MHz, while the mineral content did not excite similar changes. The complex measurement of velocity, frequency-dependent attenvation, and prevenlent frequency of ultrasound is proposed in ultrasonic diagnostics of bone for more precise determination of the influence of the porosity and the degree of mineralization on the bone condition.