A numerical study of non-isothermal turbulent coaxial jets

In this work, we propose to study non isothermal air–air coaxial jets with two different approaches: parabolic and elliptic approaches. The standard k−ε model and the RSM model were applied in this study. The numerical resolution of the equations governing this flow type was carried out for: the parabolic approach, by a “home-made” CFD code based on a finite difference method, and the elliptic approach by an industrial code (FLUENT) based on a finite volume method. In forced convection mode (Fr = ∞), the two turbulence models are valid for the prediction of the mean flow. But for turbulent sizes, k−ε model gives results closer to those achieved in experiments compared to RSM Model. Concerning the limit of validity of the parabolic and elliptic approaches, we showed that for velocities ratio r lower than 1, the results of the two approaches were satisfactory. On the other hand, for r > 1, the difference between the results became increasingly significant. In mixed convection mode (Fr ≅ 20), the results obtained by the two turbulence models for the mean axial velocity were very different even in the plume region. For the temperature and the turbulent sizes the two models give satisfactory results which agree well with the correlations suggested by the experimenters for X ≥ 20. Thus, the second order model with σ _t = 0.85 is more effective for a coaxial jet study in a mixed convection mode.