| ICP-AES法分析Au-Be合金 |
| |
| 引用本文： | 邱红莲,刘继升,杨炬.ICP-AES法分析Au-Be合金[J].光谱学与光谱分析,1999,19(1):70-71. |
| |
| 作者姓名： | 邱红莲 刘继升 杨炬 |
| |
| 作者单位： | 贵金属研究所,650221,昆明 |
| |
| 摘 要： | 研究了用ＩＣＰ－ＡＥＳ法测定Ａｕ－Ｂｅ合金中Ｂｅ及萃取Ａｕ后测定微量Ｐｔ、Ｐｄ、Ｒｈ、Ｉｒ、Ａｇ等２５个杂质元素的方法。元素间的干扰用等效浓度法校正。杂质元素标准加入回收率为９６－１０７％，相对标准偏差为１．７－１２％。取２．５ｇ试样时相对分析下限为１×１０＾－４－５×１０＾４％。测定合金成分Ｂｅ时相对误差不大于２％。
|
| 关 键 词： | 电感耦合高频等离子体原子发射光谱 铍 合金分析 |
Determination of Gold-Beryllium Alloy by Inductively Coupled Plasma-Atomic Emission Spectrometry |
| |
| Honglian QIU,Jisheng LIU,Ju YANG.Determination of Gold-Beryllium Alloy by Inductively Coupled Plasma-Atomic Emission Spectrometry[J].Spectroscopy and Spectral Analysis,1999,19(1):70-71. |
| |
| Authors: | Honglian QIU Jisheng LIU Ju YANG |
| |
| Institution: | Institute of Precious Metals, 650221 Kunming. |
| |
| Abstract: | An ICP-AES method was established for the determination of Be and impurity elements in Au-Be Alloy, such as platinum, palladium, rhodium, iridium, silver etc. The interference was corrected by using the equivalant concentration technique. The detection limit in 2.5 g sample varied from 5 x 10(-5) to 2 x 10(-4%). The ralative error for Be was less than 2%. |
| |
| Keywords: | Inductively coupled plasma atomic emission spectrometry Beryllium Alloy analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
