A sensitive and rapid bridge for the study of magnetic susceptibilities at frequencies from 200 to 106 Hz

Summary A new piece of equipment is described for measuring /₀ and /₀ as a function of field (0 to 4250 Oe), temperature (1.2°K to room temperature) and frequency (200 Hz to 1 MHz). It is about ten times more sensitive than the Hartshorn bridge used in Leiden²⁾ and it is more convenient to operate as the measuring procedure is automatic after initial adjustments have been made. The main component is a bridge circuit of four inductors, built as closely similar to each other as possible. The output from the bridge goes to two phase sensitive detectors which monitor the two outputs, one inphase, one /2 out of phase, of the bridge. A heterodyne system is used where the input signal to the bridge is obtained by mixing the output from a variable frequency oscillator with that from a 1.5 MHz oscillator and taking the difference frequency, which is phase locked to a master oscillator. The output from the bridge, after preamplification, is mixed with a second output from the variable oscillator and the difference taken again. This gives a 1.5 MHz signal modulated by the magnetic effects in the bridge which is used in the two phase-sensitive detectors. Their output is recorded on an x–y writer. The bridge needs only be balanced to an output of about 50 mV because the sample is moved between two coils and the difference voltage is measured. The use of the same equipment to measure relaxation times longer than 100 ms is also described.Communication No. 349a from The Kamerlingh Onnes Laboratorium, Leiden, The Netherlands