Effect of hydrogen reduction on microstructure and magnetic properties of mechanochemically synthesized Fe-16.5Ni-16.5Co nano-powder

Most recent findings on structural and magnetic properties of Fe-Ni-Co nano-powders produced by mechanical alloying and subsequent low-temperature hydrogen reduction are presented in this paper. At 300 rpm, with ball to powder weight ratio of 20, single phase nickel-cobalt ferrite is mechanically synthesized for 50 h. The as-milled powder is then subjected to 1 h hydrogen reduction at 700 °C. Hydrogen reduction results in the formation of Fe-16.5%Ni-16.5%Co nano-powders. The phases of the powders are identified by X-ray diffraction (XRD) utilizing Cu Kα radiation. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are used to study the morphology and the average size of the nano-powder particles. Chemical analysis of the phases present in the reduced sample is determined by electron dispersive spectrometry (EDS). The magnetic properties of the powders are measured by a vibration sample magnetometer (VSM). Results indicate a noticeable change in the magnetic properties of the samples due to Ni_0.5Co_0.5Fe₂O₄ compositional change into Fe-16.5Ni-16.5Co nano-powder.