Strength of fibers from wholly aromatic polyesters

A theory of the strength (or the tenacity) of highly oriented Liquid Crystal Polymer (LCP) fibers was developed, and its results were compared with existing tensile strength data of fibers of a copolymer of 1,4-oxybenzoate and 6,2-oxynaphthoate. A basic premise of the theory is that the mechanical load transfer between polymer chains is through intermolecular interaction which acts in a manner similar to that of shear stress, and that the fiber strength is primarily governed by the intermolecular adhesion strength. The theory also incorporates the effects of MW, MW distribution, and the chain orientation distribution. Analysis of the experimental tenacity data demonstrates that the present theory can quantitatively describe the variation of the tenacity of LCP fibers with MW both in the as-spun and in the heat-treated states. The theory further predicts that the predominant factor governing the tenacity of LCP fibers is primarily due to MW increase due to solid-state polymerization. It is also demonstrated that the intermolecular adhesion between LCP chains is relatively weak and does not improve with heat treatment. The absence of factors that limit the MW increase (i.e, imbalanced end-groups and side reactions of end groups) is a prerequisite for fast heat treatment of a LCP fiber to a high tenacity.Symbols A _f the cross-sectional area of a single polymer chain - E _f the theoretical modulus of a polymer chain - G _m the shear modulus of fiber - h(l) the chain length distribution function - l the chain length - l the number average chain length - l _c the length of chain units that are bonded to adjacent polymer chains - n ² 4G _m/CE_f - N _c the number of polymer chains per unit area perpendicular to the fiber axis - P _b the probability that a chain does not have a chain end in the fracture zone - P _e the probability that a chain has, at least, a chain end in the fracture zone - q _e,q _b the probability of finding an ending and a bridging polymer chain, respectively, in the fracture zone - l the length of fracture zone - the elongation of a polymer chain - the chain orientation angle - _f the normal stress that acts on a polymer chain - _fu the fiber tenacity - _e the shear stress that acts on a polymer chain surface Dedicated to Prof. Dr. rer. nat. Wolfgang Hilger, Chairman of Hoechst A.G. in honor of his 60th birthday