Desorption of chloroorganic compounds from a bed of activated carbon

The desorption of 1,2-dichloroethane from a bed of DTO activated carbon after adsorption from aqueous solution has been investigated. The desorption process was carried out using steam. The basic characteristics of the process were determined. The studies were performed in the temperature range 100-160 degrees C. A steam consumption indicator reduces with an increase of temperature from 100 to 140 degrees C. An elevation of temperature above 140 degrees C does not cause an improvement in the desorption efficiency. The number of performed cycles does not reduce the adsorption capacity of used activated carbon. Studies on the regeneration of the bed saturated with a seven-component mixture of chloroorganic compounds at temperature of 140 degrees C were carried out. The degree of removal of the sum of chloro-derivatives exceeded 0.96 at a volume ratio of steam (recalculated on the condensate) to bed of about 10. It was found that the dechlorination proceeds during desorption at elevated temperature. The quantitative ratio of chloro-derivatives in the desorbate was changed in comparison to the composition of wastewater directed to the adsorption.