Interactions Between an Ionic Liquid and Silica,Silica and Silica,and Rubber and Silica and Their Effects on the Properties of Styrene-Butadiene Rubber Composites

An investigation of the effect of an ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate (BMI), on the properties of silica reinforced styrene-butadiene rubber (SBR), aimed to correlate the interactions between the ionic liquid and silica, silica and silica, and silica and rubber with the macro-properties and microstructure of SBR and SBR/silica vulcanizates is described. The interaction between the ionic liquid and silica was characterized by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR), the interaction between silica and silica was characterized by a rubber processing analyzer (RPA), and the interaction between rubber and silica was characterized by the bound rubber content. The FTIR analysis revealed that BMI can react with the hydroxyl groups on the surface of silica, improving the compatibility between the rubber and silica. The RPA and bound rubber testing indicated that the interactions between silica and silica particles were weakened and the interaction between silica and rubber increased with the incorporation of BMI into the SBR rubber. The bound rubber content showed a maximum with a BMI content of 3 phr. At the same time, the dispersion of silica in SBR was improved with the incorporation of BMI. With the increase of BMI content, the curing rate was greatly improved and the crosslink density increased. BMI also increased the tensile strength and abrasion resistance of the SBR vulcanizates. Most important, the BMI significantly improved the dynamic properties of the rubber composites, especially the wet-skid resistance and rolling resistance. However, excessive BMI (beyond 3 phr) acted as a plasticizer and was detrimental to the mechanical properties, resulting in a decrease of tensile strength and abrasion resistance.