首页 | 本学科首页   官方微博 | 高级检索  
     检索      

NbN/AlN/NbN超导隧道结的制备工艺
引用本文:刘希,康琳,孙静,赵少奇,昌路,吉争鸣,吴培亨.NbN/AlN/NbN超导隧道结的制备工艺[J].低温与超导,2007,35(1):51-52.
作者姓名:刘希  康琳  孙静  赵少奇  昌路  吉争鸣  吴培亨
作者单位:南京大学电子科学与工程系超导电子学研究所,南京,210093
基金项目:国家重点基础研究发展计划(973计划),国防重点实验室基金
摘    要:研究了在MgO基片上制备NbN/AlN/NbN结的工艺,NbN和AlN的制备分别采用直流磁控溅射和交流磁控溅射。为了得到良好特性的隧道结,首先要在高真空反应室里沉积三层膜结构,经过光刻和反应离子刻蚀,得到底电极和桥区的三层结构图形。再经过第二步光刻和刻蚀,仅保留底电极最下层的NbN,得到结区的三层结构图形,并覆盖AlN绝缘层。经过Lift-off工艺,洗去结区上的光刻胶,最后沉积上电极。使用四端子方法对制备的隧道结进行了一系列测量,特别是在高频(THz)下的响应。

关 键 词:超导隧道结  NbN  AlN  磁控溅射
修稿时间:2006年8月22日

The research of the fabrication of NbN/AlN/NbN superconductor tunnel junctions
Liu Xi,Kang Lin,Sun Jing,Zhao Shaoqi,Cang Lu,Ji Zhenganin,Wu Peiheng.The research of the fabrication of NbN/AlN/NbN superconductor tunnel junctions[J].Cryogenics and Superconductivity,2007,35(1):51-52.
Authors:Liu Xi  Kang Lin  Sun Jing  Zhao Shaoqi  Cang Lu  Ji Zhenganin  Wu Peiheng
Abstract:We present our process for fabricating NbN/AlN/NbN tunnel junctions on MgO substrates,in which NbN layers and AlN layers were prepared by DC and RF magnetron sputtering.In order to fabricate tunnel junctions with high qualities,all the three layers should be prepared once in our high vacuum chamber.Then we got the pattern of the junctions in the method of photolithography and reactive ion etching,followed with the insulated layer(AlN) and the upper probe layer(NbN).The current-voltage(I-V) characteristics of junctions were measured with four terminal probes in low temperature,and together with the other characteristics in high frequency,especially in the terahertz band.
Keywords:NbN  AlN
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号