On one-port characterization of noise sources in ducts by using external loads

Equivalent acoustic source characterization of duct-borne fluid machinery noise is often undertaken by interpolating the results of two-microphone pressure measurements with different external acoustic loads over a linear one-port source model. If the source is time-invariant, the one-port source characteristics can be determined by using only two external loads. This is well known as the two-load method. An extension of the two-load method for time-variant sources is also available and known as the multiple-load method. In these methods the source is treated as a ‘black-box’. This paper addresses the problem of one-port source characterization when the linear operations inherent in the ‘black-box’ are known explicitly. The equations governing the explicit one-port source models are derived and the source characteristics are shown to be measurable using only few acoustic loads. It is not the purpose of this paper to discuss the application of these models to any specific fluid machinery; however, of particular interest are the explicit source models that require only two loads. Numerical results are presented to show some features of such time-invariant and time-variant explicit one-port source models.