首页 | 本学科首页   官方微博 | 高级检索  
     检索      

硅钙合金中钙含量的测定
引用本文:薛光荣,沈志希.硅钙合金中钙含量的测定[J].光谱实验室,2006,23(1):55-57.
作者姓名:薛光荣  沈志希
作者单位:1. 中国航天科技集团公司上海空间电源研究所,上海市苍梧路388号,200233
2. 上海安谱科学仪器有限公司分析测试中心,上海市,200030
摘    要:研究了用一氧化二氮-乙炔火焰原子吸收光谱法测定硅钙合金中钙,并对样品消化处理条件和干扰因素进行了综合考虑.该法灵敏度高、步骤简单,操作容易掌握,干扰少等特点.其相对标准偏差均小于1.0%(n=6).加标回收率均为97.0%-100.0%范围内,本法完全达到了仪器分析质量与质量控制要求.

关 键 词:一氧化二氮-乙炔火焰  原子吸收光谱法  硅钙合金  
文章编号:1004-8138(2006)01-0055-03
收稿时间:2005-08-12
修稿时间:2005-08-30

Measurement of Calcium in the Silicon Calcium Alloy
XUE Guang-Rong,SHEN Zhi-Xi.Measurement of Calcium in the Silicon Calcium Alloy[J].Chinese Journal of Spectroscopy Laboratory,2006,23(1):55-57.
Authors:XUE Guang-Rong  SHEN Zhi-Xi
Institution:Shanghai Institute of Space Power Source, China Aerospace Science and Technology Corporation,Shanghai 200233,P. R. China;Analyze the Test Center,Shanghai ANPEL Science Instrument Company ,Shanghai 200030 ,P. R. China
Abstract:The amount of calcium in the silicon calcium alloy was determined by nitrous oxideacetylene flame atomic absorption spectrometer. The optimum conditions were studied. The method has the advantages of high sensitivity, less interference and good in selectivity and reappearance. The relative standard deviations are all less than 1. 0%(n = 6)with standard adding recovery of 97. 0%-100. 0%, which are satisfactory for quality of laboratory.
Keywords:Nitrous Oxide-Acetylene Flame  Atomic Absorption Spectrometry  Silicon Calcium Alloy  Calcium    
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号