Differential pulse voltammetric methods for the simultaneous estimation of uranium-iron and uranium-cadmium mixtures in solution |
| |
Authors: | N L Sreenivasan T G Srinivasan |
| |
Institution: | (1) Fuel Chemistry Division, Chemical Group, Indira Gandhi Centre for Atomic Research, 603 102 Kalpakkam, India |
| |
Abstract: | Differential pulse voltammetric methods have been developed for the simultaneous estimation of the constituents of uranium-iron and uranium-cadmium mixtures in solution. A mixture of 1M H3PO4–1M KH2PO4 (with a pH 1.5), was found to be the most ideal supporting electrolyte for both methods, among many that were evaluated for their suitability. In uranium-iron mixtures the calibration for iron was found to be linear up to 150 g ml–1 (r2=0.9986), while that of uranium up to 500 g ml–1 (r2=0.999). Iron at 6.7 g ml–1 level could be determined in the presence of 800 fold uranium (wt/wt) without significant interference. Uranium at 21 g ml–1 level could be analyzed with 5-fold iron (wt/wt). This upper limit of iron was due to the precipitation of iron as phosphate. In the case of uranium — cadmium mixtures, cadmium calibration for cadmium was found to be linear up to 1300 g ml–1 (r2=0.9993). Concentration levels of 4.6 g ml–1 Cd could be determined at a 500-fold excess (wt/wt) of uranium. Uranium calibration was linear up to 500 g ml–1 (r2=0.999) and 21 g ml–1 uranium could tolerate up to a 1000-fold excess of cadmium (wt/wt). Both procedures could tolerate 10 g ml–1 levels of metal ions, such as chromium, copper, manganese, molybdenum and vanadium. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|