Optimization of cloud point extraction of copper with neocuproine from aqueous solutions using Taguchi fractional factorial design

Taguchi method was applied to optimize cloud point extraction (CPE) conditions for preconcentration and determination of trace amounts of copper by UV-Vis spectrophotometry. Briefly, the copper ions formed complexes with neocuproine in aqueous solution; then, Triton X-114 (0.15%, w/v) was added and phase separation occurred upon heating to 60°C. The copper complexes were preconcentrated into the small volume of the surfactant-rich phase; after centrifugation, the surfactant-rich phase was diluted with methanol and absorbance was measured at 455 nm. The main factors affecting the CPE were evaluated and optimized with Taguchi orthogonal array design (OA ₂₅). Under the optimum conditions, the calibration curve was linear in the range 2–500 μg/L (r ² > 0.997). The limit of detection and preconcentration factor were 1.8 μg/L and 37.2, respectively. The applicability of the proposed method was successfully confirmed by preconcentration and determination of trace amounts of copper in water samples and satisfactory results were obtained.