首页 | 本学科首页   官方微博 | 高级检索  
     检索      

长时热变形下硅反射镜的参量选择
引用本文:杜燕贻,安建祝,束小建.长时热变形下硅反射镜的参量选择[J].强激光与粒子束,2011,23(5).
作者姓名:杜燕贻  安建祝  束小建
作者单位:北京应用物理与计算数学研究所, 北京 100094
基金项目:中国工程物理研究院科学技术基金项目(20060431)
摘    要: 以硅反射镜材料为例,对长时热变形下镜面吸收率、镜夹持半径及激光功率等参量对氧碘化学激光输出光束特性的影响进行了研究,给出了参量选择范围。模拟计算结果表明:镜面吸收率是控制输出功率的关键因素之一,要保证在出光10 s内输出功率下降程度小于20%,吸收率应不超过3.0×10-4。在四点夹持的情况下,镜面夹持半径大小与输出光束大小相关,当夹持半径与输出光束半径的比值大于1.40时,可以避免夹持过小造成的镜面边缘处发生畸变的现象。

关 键 词:反射镜  热变形  光强  相位  输出功率
收稿时间:1900-01-01;

Parameters design of silicon reflectors in long-time thermal distortion
Du Yanyi,An Jianzhu,Shu Xiaojian.Parameters design of silicon reflectors in long-time thermal distortion[J].High Power Laser and Particle Beams,2011,23(5).
Authors:Du Yanyi  An Jianzhu  Shu Xiaojian
Institution:(Beijing Institute of Applied Physics and Computational Mathematics, Beijing 100094, China)
Abstract:The paper investigates the output characteristics of a chemical oxygen iodine laser(COIL) affected by nonideal resonator mirrors.Various parameters in long-time thermal deformation of silicon mirrors,such as absorption factor,supporting radius,and thermal load,are considered.The simulation results show that the absorption of mirrors plays a key role in beam quality control.If the decrease in laser output power is required to be less than 20% within the working time of 10 s,the absorption factor must be no m...
Keywords:reflector  thermal distortion  intensity  phase  output power  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号