首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Drag coefficients of spherical liquid droplets Part 2: Turbulent gaseous fields
Authors:Dr W D Warnica  Dr M Renksizbulut  Dr A B Strong
Institution:(1) Minerals Processing Research Group, BHP Research, Newcastle Laboratories, P.O. Box 188, 2287 Wallsend, NSW, Australia;(2) Department of Mechanical Engineering, University of Waterloo, N2L 3G1 Waterloo, Ontario, Canada
Abstract:The drag of non-evaporating, spherical, liquid droplets was measured in turbulent flow fields at parametric ranges relevant to spray combustion, characterized by the droplet Reynolds number, and the intensity and spatial scales of turbulence. The experimental apparatus comprised a wind-tunnel and a piezo-electric droplet generator. The procedure was to inject water droplets of uniform size co-currently and continuously with vertical turbulent air flows while droplet velocity was measured at different elevations using laser-Doppler velocimetry. Turbulence was characterized using hot-wire anemometry prior to droplet injection. Drag coefficients were calculated using these main measurements and the law of conservation of mechanical energy. Reynolds numbers were investigated in the range 10–100, in terms of the equivalent spherical diameter of a droplet, and the mean relative speed between the ambient gaseous field and the droplets. Weber numbers were much less than unity so droplets were effectively spherical. Relative intensities of turbulence were investigated in the range 20–65 percent, in terms of the mean relative speed. Spatial scales of turbulence were large in comparison to the droplets; the ratio between the spatial integral scale and the droplet diameter was in the range 11–38, and the Kolmogorov scale was comparable in size or smaller than the droplet diameter. Experimental data showed that the drag in turbulent fields under these conditions is not significantly different than that of solid spheres in a quiescent field at the same Reynolds number.The financial support of the Natural Sciences and Engineering Research Council of Canada and the Manufacturing Research Corporation of Ontario is gratefully acknowledged.
Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号