| 基于MPS方法的汽泡凝结数值模拟研究 |
| |
| 引用本文： | 种道彤,刘继平,严俊杰,Ishiwatari Yuki,Oka Yoshiaki.基于MPS方法的汽泡凝结数值模拟研究[J].工程热物理学报,2011(9). |
| |
| 作者姓名： | 种道彤 刘继平 严俊杰 Ishiwatari Yuki Oka Yoshiaki |
| |
| 作者单位： | 西安交通大学动力工程与多相流重点实验室;日本东京大学; |
| |
| 基金项目： | 国家自然科学基金资助项目(No.51006081); 教育部新世纪人才支持计划(No.NCET-08-0441); 国家重点基础研究计划项目(973)(No.2009CB219803) |
| |
| 摘 要： | 采用移动粒子半隐式(MPS)方法对静止过冷水中单个汽泡的凝结现象进行了数值模拟,研究了不同初始压力和初始直径时饱和蒸汽汽泡凝结过程,获得了凝结过程中汽泡形状、当量直径和压力的变化规律;汽泡初始压力为0.1～0.5MPa,初始直径为2mm、3mm和5mm;过冷水压力为0.1MPa,温度为70℃。结果表明两相界面不存在压差时,凝结过程中汽泡始终保持球形,汽泡当量直径逐渐减小,压力近似不变;相界面存在压差时,凝结过程中汽泡从球形逐渐变为心形、半月形,汽泡当量直径和压力会出现周期性振荡,且初始压力越大振荡幅度越大。
|
| 关 键 词： | MPS方法 汽泡 凝结 压差 |
Numerical Simulation on Steam Bubble Condensation Based on MPS Method |
| |
| CHONG Dao-Tong LIU Ji-Ping YAN Jun-Jie Ishiwatari Yuki Oka Yoshiaki.Numerical Simulation on Steam Bubble Condensation Based on MPS Method[J].Journal of Engineering Thermophysics,2011(9). |
| |
| Authors: | CHONG Dao-Tong LIU Ji-Ping YAN Jun-Jie Ishiwatari Yuki Oka Yoshiaki |
| |
| Institution: | CHONG Dao-Tong~1 LIU Ji-Ping~1 YAN Jun-Jie~1 Ishiwatari Yuki~2 Oka Yoshiaki~2 (1.State Key Laboratory of Multiphase Flow in Power Engineering,Xi'an Jiaotong University,Xi'an 710049,China,2.Department of Nuclear Engineering and Management,University of Tokyo,Tokyo 1138586,Japan) |
| |
| Abstract: | The condensation of single saturated steam bubble in quiescent subcooled water was simulated based on MPS method.The simulation was carried out under different initial bubble pressures and diameters,and the shape formation,bubble equivalent diameter and pressure during condensation were obtained.The initial bubble pressure ranged from 0.1 MPa to 0.5 MPa,and the initial bubble diameter was kept at three different values of 2 mm,3 mm and 5 mm.The pressure and temperature of the quiescent water was 0.1 MPa and... |
| |
| Keywords: | MPS method steam bubble condensation pressure difference |
| 本文献已被 CNKI 等数据库收录！ |
|
