Lanthanide‐Based Layer‐Type Two‐Dimensional Coordination Polymers Featuring Slow Magnetic Relaxation,Magnetocaloric Effect and Proton Conductivity

Three lanthanide‐based two‐dimensional (2D) coordination polymers (CPs), [Ln(L)(H₂O)₂]_n, {H₃L=(HO)₂P(O)CH₂CO₂H; Ln=Dy³⁺ (CP 1 ), Er³⁺ (CP 2 )} and [{Gd₂(L)₂(H₂O)₃}^.H₂O]_n, (CP 3 ) were hydrothermally synthesized using phosphonoacetic acid as a linker. Structural features revealed that the dinuclear Ln³⁺ nodes were present in the 2D sheet of CP 1 and CP 2 while in the case of CP 3 , nodes were further connected to each other forming a chain‐type arrangement throughout the network. The magnetic studies show field‐induced slow magnetic relaxation property in CP 1 and CP 2 with U_eff values of 72 K (relaxation time, τ₀=3.05×10^?7 s) and 38.42 K (relaxation time, τ₀=4.60×10^?8 s) respectively. Ab‐initio calculations suggest that the g tensor of Kramers doublet of the lanthanide ion (Dy³⁺ and Er³⁺) is strongly axial in nature which reflects in the slow magnetic relaxation behavior of both CPs. CP 3 exhibits a significant magnetocaloric effect with ?ΔS_m=49.29 J kg^?1 K^?1, one of the highest value among the reported 2D CPs. Moreover, impedance analysis of all the CPs show high proton conductivity with values of 1.13×10^?6 S cm^?1, 2.73×10^?3 S cm^?1 and 2, 6.27×10^?6 S cm^?1 for CPs 1 – 3 , respectively, at high temperature (>75 °C) and maximum 95 % relative humidity (RH).     

氮低温制冷循环系统在大科学装置中的应用与发展

大科学装置中低温设备的氮低温冷量需要日益快速增长,为减少能耗和保障装置的长期稳定运行,基于大科学装置氮低温系统运行需求,介绍了氮低温制冷循环系统在国内外大科学装置中的应用情况,总结了目前大科学装置中应用氮低温制冷循环系统的研究现状,并探讨以氮制冷机为核心的氮低温制冷循环系统在未来大科学装置中发展方向。     

Comprehensive performance of a ball-milled La0.5Pr0.5Fe11.4Si1.6B0.2Hy/Al magnetocaloric composite

Due to the hydrogen embrittlement effect, La(Fe,Si)₁₃-based hydrides can only exist in powder form, which limits their practical application. In this work, ductile and thermally conductive Al metal was homogeneously mixed with La_0.5Pr_0.5Fe_11.4Si_1.6B_0.2 using the ball milling method. Then hydrogenation and compactness shaping of the magnetocaloric composites were performed in one step via a sintering process under high hydrogen pressure. As the Al content reached 9 wt.%, the La_0.5Pr_0.5Fe_11.4Si_1.6B_0.2H_y/Al composite showed the mechanical behavior of a ductile material with a yield strength of ~44 MPa and an ultimate strength of 269 MPa accompanied by a pronounced improvement in thermal conductivity. Due to the ease of formation of Fe-Al-Si phases and the several micron and submicron sizes of the composite particles caused by ball milling process, the magnetic entropy change of the composites was substantially reduced to ~1.2 J/kg· K-1.5 J/kg· K at 0 T-1.5 T.     

氧化铟锡薄膜的磁感应热声分析

基于优良导体在磁场下的涡流效应理论和固体的热声效应理论,建立了氧化铟锡(ITO)导电薄膜磁-热-声效应的理论模型,推导了导电薄膜热致发声的温度振荡和输出声压表达式。对有基底的ITO导电膜进行了磁场下的热声理论计算和实验测试,结果表明：薄膜的温度振荡值随频率呈上升趋势,与电-热-声模型相比趋势相反;薄膜声压的理论值与实验值在频域内的变化趋势基本吻合,验证了理论模型的正确性。进而,根据磁-热-声的理论模型,分析了线圈相关参数对薄膜声压级的影响,结果表明：薄膜声压级随着线圈匝数的增加而增大,随着薄膜与线圈中心距离的增加而减小,随着线圈半径的增加而减小。文中的研究结果拓展了导电薄膜在扬声器等领域的应用。     

Thermomagnetic properties of very heavy fermions suitable for adiabatic demagnetisation refrigeration at low temperature

ABSTRACT

With the aim to improve the performance of classical paramagnetic salts for adiabatic refrigeration processes at the sub-Kelvin range, relevant thermodynamic parameters of some new Yb-based intermetallic compounds are analysed and compared. Two main applications are considered: (i) those requiring temperature fixed-points to be reached applying magnetic fields of moderate intensity for satellite applications, and (ii) those which can be used for controlled thermal drifts in laboratory applications. Different thermomagnetic trajectories of the entropy are identified depending on respective specific heat behaviours and the constraints imposed by the Nernst postulate at the sub-Kelvin range. Some simple relationships are proposed to compare the diverse magnetocaloric characteristics of different systems. This procedure allows to include the classical Cerium-Magnesium-Nitride (CMN) salt in that comparison.     

冷凝法油气回收技术与应用

油品在储运和销售过程中部分轻烃组分挥发进入大气,造成资源浪费和环境危害.油气回收既可实现油气污染治理又能产生可观的经济效益.结合中国油气储运和销售环节的现状以及相关技术的发展,对几种油气回收的方法进行了对比分析,认为采用多元工质复叠(或自复叠)制冷技术的冷凝法具有较好的经济性和可靠性.介绍了自主研发的冷凝式油气回收设备...     

基于典型工况的半导体制冷系统优化方式探讨

半导体制冷的特殊性,使制冷优化探讨对其工程应用具有重要指导意义.文中阐述了作为制冷片工作参数优化依据的最大效率E、等增量I、等功率P、综合最佳S、最大制冷量Q和最大温差T六种典型制冷工况.工况对比分析指出,温差亦是影响制冷性能的重要因素.在讨论各工况应用场合和制冷片损坏机理的基础上.探讨了温差优化和供电与控制方式优化措...     

半导体制冷电脑CPU恒温散热研究

用风冷的方法给CPU降温存在着降温效率低、反应速度慢、风扇的机械转动可靠性差、噪音大等弊病.因此,这里设计了一种用半导体制冷降温的装置来提高CPU的散热效率.它用温度传感器检测电脑CPU温度,当CPU温度超过设定温度的时侯,控制电路供电使半导体制冷块制冷,使CPU温度保持恒定.为防止冷凝结露,采用绝热材料密封导热铜板及...     

热声网络的辛对称特征

将辛数学引入热声系统网络模型的处理,通过对热声系统网络传输矩阵的分析,证明系统中等温流体管道内工质运动的传输矩阵为辛矩阵.存在温度梯度的热声回热器中气体工质微团的传输矩阵不是辛矩阵,但是可以通过变量代换将传输矩阵转换为辛矩阵,使整个热声系统网络传输都可用辛矩阵传输来表示.辛对称的形式有助于热声系统网络模型的分析与计算. 关键词： 辛 热声 网络模型 传输矩阵     

400W行波热声发电系统的实验研究

本文阐述了为太阳能发电系统设计的400 W行波热声发电系统(TWTAEG)的实验研究过程.实验系统由行波热声发动机和直线发电机组成,系统采用平均压力为3.5 MPa的氦-氩混合气体为工质,其中氩气分压比为1.4%,系统运行频率为74Hz.实验中最大输出电功为446 W,此时的热电效率为13%;在输出电功为416 W时热...