The volume of micropores and the Dubinin—Radushkevich equation

The substantiation and the area of applicability of the Dubinin—Radushkevich equation for determination of the micropore volume in microporous systems from experimental data on adsorption isotherms were examined. It was shown that the micropore volumes found using the standard procedure are overestimated. A more accurate method for determining the mircopore volumes based on the pressure of filling of micropores was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 659–664, April, 1998.     

Analysis of the Micropore Structure of Various Microporous Materials from Nitrogen Adsorption at 77 K

The micropore structure of four microporous materials (two zeolites, ZSM-5 and Y-82; an activated carbon and an alumina pillared clay) and their binary physical mixtures (50-50 wt%) have been examined by nitrogen adsorption at 77 K. Various micropore sizes have been considered from the stages on the micropore filling mechanism in the microporous materials. The application of the Dubinin-Astakhov (DA) equation to characterize and obtain the adsorption potential distributions of the microporous materials is presented.     

A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

MMM分子筛的制备与表征

 以碱溶液处理ZSM－5分子筛，得到了含微孔及介孔的MFI结构分子筛（简称MMM），并采用XRD，XRF，SEM，XPS和低温氮吸附等技术对分子筛进行了表征．结果表明，通过改变处理碱的浓度可以得到具有不同物化性能的MMM分子筛，其化学组成、介孔及微孔的大小和多少，及分子筛晶体上n（Al）／n（Si）均随碱浓度的变化而变化，随着碱浓度的增加，分子筛部分微孔结构遭到破坏，介孔的数量增加，孔径增大，n（Al）／n（Si）增大．碱处理脱硅的过程包括脱除晶粒间的无定形物质，脱除分子筛表面的硅及脱除分子筛体相硅等步骤，硅脱除以后形成了介孔．     

ADSORPTION OF 2,4-D ON MODIFIED HYPERCROSSLINKED POLYSTYRENE （NDA-99） AND XAD-4 RESIN

The adsorption behavior of pesticide 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution has been investigated using a hypercrosslinked polystyrene adsorbent (NDA-99) modified by dimethylamine group as well as a nonionic macroporous adsorbent (XAD-4). The Langmuir and Freundlich isotherm models were employed to fit the experimental data to describe adsorption mechanism. It shows that NDA-99 resin exhibits an adsorption affinity for 2,4-D higher than XAD-4 resin owing to its exceptional micropore structure and the amine group of the hypercrosslinked matrix.Further studies indicate that the hydrogen bonding interaction and the stronger π-π conjugation play a significant role in the course of the adsorption of 2,4-D on NDA-99 resin, which is in agreement with the IR spectroscopic results and the △E values of HOMO (the highest occupied molecular orbit) of adsorbent and LUMO (the lowest unoccupied molecular orbit) of adsorbate calculated from the MINDO/3 model.     

Nitrogen adsorption on fluorinated activated carbon fiber

Nitrogen adsorption isotherms for fluorinated activated carbon fiber (F-ACF) and fluorinated carbon black (F-CB) were measured at 77 K. Surface structures of F-ACF and F-CB were examined by _s -plot analysis using the adsorption data on the nonporous carbon black (CB) and F-CB. The surface energy of F-ACF was lower than that of ACF. The micropore structure of ACF was preserved even after fluorination, although the limiting adsorption amount and the micropore width decreased with fluorination.     

煤微孔表面的分形维数及其变化规律的研究

本文利用气体吸附数据确定了各种煤阶煤（从褐煤到无烟煤）和煤焦气化反应过程中微孔表面的分形维数及其变化规律。这有助于进一步认识煤的孔结构特征。     

Estimation of micropore size distribution in active carbons from adsorption isotherms of water vapor

A possibility of estimation of the micropore size distribution in the carbon adsorbents with the developed micro-and mesoporous structure by analysis of the adsorption isotherms of water vapors was considered. At saturation water condenses in micropores in a form of a weakly compressed liquid. However, water molecules in micropores are packed not so closely as in the liquid because of steric hindrance. Therefore, the real density of water adsorbed in the micropores is lower than that of water adsorbed on an open surface and lower than the density of the normal liquid. An analysis of the adsorption isotherms of water vapors with account for the both opposite effects on the water density gives reliable data on the micropore sizes of the carbon adsorbents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 40–43, January, 2007.     

水分子在微孔隙介质中的受限扩散模拟

在饱和多相流体孔隙介质中,利用核磁共振测得的扩散系数可以区分油气水,并用于饱和度等岩石物理参数的求取,但在微小孔隙（< 20 μm）中,流体的表观扩散系数会偏离其自由扩散系数．通过有限差分和随机游走模拟方法对水分子在单孔隙及多孔隙介质中的扩散进行数值模拟,考察水分子扩散受限的程度．结合核磁共振在测井及实验室岩石物理应用的技术,进一步分析了受限扩散对求取油水饱和度等岩石物理参数造成的影响．同时,分析总结了两种模拟方法的使用条件及优缺点．