一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

Freestanding Carbon Nanotube Film for Flexible Straplike Lithium/Sulfur Batteries

Flexible lithium/sulfur (Li/S) batteries are promising to meet the emerging power demand for flexible electronic devices. The key challenge for a flexible Li/S battery is to design a cathode with excellent electrochemical performance and mechanical flexibility. In this work, a flexible strap-like Li/S battery based on a S@carbon nanotube/Pt@carbon nanotube hybrid film cathode was designed. It delivers a specific capacity of 1145 mAh g⁻¹ at the first cycle and retains a specific capacity of 822 mAh g⁻¹ after 100 cycles. Moreover, the flexible Li/S battery retains stabile specific capacity and Coulombic efficiency even under severe bending conditions. As a demonstration of practical applications, an LED array is shown stably powered by the flexible Li/S battery under flattened and bent states. We also use the strap-like flexible Li/S battery as a real strap for a watch, which at the same time provides a reliable power supply to the watch.     

铜铁镁三掺铌酸锂晶体的第一性原理研究

利用基于密度泛函理论的第一性原理,研究了Cu:Fe:Mg:LiNbO3晶体及对比组的电子结构和光学特性.研究显示,单掺铜或铁铌酸锂晶体的杂质能级分别由Cu 3d轨道或Fe 3d轨道贡献,禁带宽度分别为3.45和3.42 eV;铜、铁共掺铌酸锂晶体杂质能级由Cu和Fe的3d轨道共同贡献,禁带宽度为3.24 eV,吸收峰分别在3.01,2.53和1.36 eV处;Cu:Fe:Mg:LiNbO3晶体中Mg^2+浓度低于阈值或高于阈值(阈值约为6.0 mol%)的禁带宽度分别为2.89 eV或3.30 eV,吸收峰分别位于2.45 eV,1.89 eV或2.89 eV,2.59 eV,2.24 eV.Mg^2+浓度高于阈值,会使吸收边较低于阈值情况红移;并使得部分Fe^3+占Nb位,引起晶体场改变,从而改变吸收峰位置和强度.双光存储应用中可选取2.9 eV作为擦除光,2.5 eV作为读取和写入光,选取Mg^2+浓度达到阈值的三掺晶体在增加动态范围和灵敏度等参量以及优化再现图像的质量等方面更具优势.     

1,2‐Dimethoxyethane Degradation Thermodynamics in Li−O2 Redox Environments

The reaction thermodynamics of the 1,2‐dimethoxyethane (DME), a model solvent molecule commonly used in electrolytes for Li?O₂ rechargeable batteries, has been studied by first‐principles methods to predict its degradation processes in highly oxidizing environments. In particular, the reactivity of DME towards the superoxide anion O₂^? in oxygen‐poor or oxygen‐rich environments is studied by density functional calculations. Solvation effects are considered by employing a self‐consistent reaction field in a continuum solvation model. The degradation of DME occurs through competitive thermodynamically driven reaction paths that end with the formation of partially oxidized final products such as formaldehyde and methoxyethene in oxygen‐poor environments and methyl oxalate, methyl formate, 1‐formate methyl acetate, methoxy ethanoic methanoic anhydride, and ethylene glycol diformate in oxygen‐rich environments. This chemical reactivity indirectly behaves as an electroactive parasitic process and therefore wastes part of the charge exchanged in Li?O₂ cells upon discharge. This study is the first complete rationale to be reported about the degradation chemistry of DME due to direct interaction with O₂^?/O₂ molecules. These findings pave the way for a rational development of new solvent molecules for Li?O₂ electrolytes.     

A Supramolecular Chiral Auxiliary Approach: “Remote Control” of Stereochemistry at a Hierarchically Assembled Dimeric Helicate

Dimeric hierarchically‐assembled titanium(IV) helicates are in solvent‐dependent equilibrium with the corresponding monomers. Statistically formed mixtures of such complexes bearing chiral stereocontrolling ligands and achiral diene‐substituted ligands show high diastereoselectivity and reasonable enantioselectivity in the Diels–Alder reaction with maleimides if the reaction proceeds with the dimer but not with the monomer. Thus, solvent dependent switching between the monomer and dimer enables on/off switching of the enantioselectivity.     

Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions

Lithium–sulfur batteries are among the most promising electrochemical energy storage devices of the near future. Especially the low price and abundant availability of sulfur as the cathode material and the high theoretical capacity in comparison to state‐of‐the art lithium‐ion technologies are attractive features. Despite significant research achievements that have been made over the last years, fundamental (electro‐) chemical questions still remain unanswered. This review addresses ten crucial questions associated with lithium–sulfur batteries and critically evaluates current research with respect to them. The sulfur–carbon composite cathode is a particular focus, but its complex interplay with other hardware components in the cell, such as the electrolyte and the anode, necessitates a critical discussion of other cell components. Modern in situ characterisation methods are ideally suited to illuminate the role of each component. This article does not pretend to summarise all recently published data, but instead is a critical overview over lithium–sulfur batteries based on recent research findings.     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.     

Stereoselective Synthesis and Retentive Trapping of α‐Chiral Secondary Alkyllithiums Leading to Stereodefined α,β‐Dimethyl Carboxylic Esters

The treatment of α‐chiral secondary alkyl iodides with tBuLi at ?100 °C leads to the corresponding secondary alkyllithiums with high retention of configuration. Subsequent quenching with various electrophiles such as Bu₂S₂, DMF, MeOB(OR)₂, or Et₂CO provides the desired products with retention of configuration. Furthermore, a transmetalation with CuBr?P(OEt)₃ also allows retentive trapping with acid chlorides and ethylene oxide. The quenching of the resulting alkyllithiums with ClCO₂Et furnishes stereoselectively syn‐ and anti‐ethyl‐2,3‐dimethyl ester carboxylates (d.r.>94 %). Related esters bearing three adjacent stereo‐controlled centers (stereotriads) have also been prepared. This method has been applied to the synthesis of the ant pheromone (±)‐lasiol in 26 % overall yield (four steps) with d.r.=97:3 starting from commercially available cis‐2,3‐epoxybutane.