Singlet exciplexes between a thioxanthone derivative and substituted aromatic quenchers: role of the resonance integral

Fluorescence quenching of a thioxanthone derivative by methyl- and methoxy-substituted benzenes (MeB and MeOB, respectively) is performed in solvents of different polarity. Emissive exciplexes are observed even in polar solvents and provide kinetic and spectroscopic data over a large scale of solvent polarity. These data were subsequently analyzed by use of a new theoretical model that leads to a thermodynamic relationship between exciplex and electron-transfer driving forces Delta G(exc) and Delta G(et), respectively. The remarkable agreement found between this model and both kinetic and spectroscopic data supports its validity. Moreover, the difference observed between MeB and MeOB compounds in quenching efficiency is analyzed by this model and provides the main parameters governing exciplex features, especially the resonance integral between locally excited and charge-transfer states.     

Magnetic field effects detected by exciplex fluorescence and preferential solvation in binary solvents. The effect of temperature

At 20–70 °C, the temperature has almost no effect on the semisaturation field,B _1/2, or on the magnetic effects detected by exciplex fluorescence (pyrene/N,N-dimethylaniline) in binary benzene-DMSO mixtures. In individual solvents (ethanol, methanol) heating leads to a noticeable increase in the magnetic effect, whileB _1/2 decreases. The results obtained corroborate a previously proposed hypothesis that polar microclusters are formed in binary solvents with components of different polarity. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1821–1823, October, 1993.     

Effects of Self—coiling of Organic Molecules on Intramolecular Exciplex Formation and Fluoresscence Quenching in DX—H2O Solvent System

Effects of self-coiling of organic molecules on intramolecular exciplex formation of compound I,in which the carbazole chromophore and terephthalic acid methylester acceptor group are linked by one (CH2)10 chain,and the decrease of the fluorescence intensities of compounds Ⅱ，Ⅲ，and Ⅳ,in which the carbazole chromophore and 3,5-dinitrobenzoate are connected by one aliphatic chain of (CH2)10 (Ⅱ），（CH2）12（Ⅲ）,or (CH2)4(Ⅳ）,have been studied in the dioxane (DX)-H2O binary system.The results show that self-coiling of organic molecules in DX-H2O facilitates intramolecular exciplex formation of I and induces the decrease of fluorescence intensities of Ⅱ,bacause of the proximity effect brought about by selfcoiling of organic molecules under hydrophobic-lipophilic interaction(HLI) between the excited carbazole chromophore and the acceptor.Since the similar effects are observed even when the concentration of the probes are less than their CAgCs(critical aggregate concentrations )in the DX-H2O mixture with the same φ values,formation of the intermolecular exciplex has been excluded.The effects are found to be strongly depended on φ values,indication that they are mainly driven by HLI.The properties of the acceptors can also affect the intramolecular exciplex formation.With terephthalic acid methylester moiety as the acceptor,the carbazole chromophore exhibits the fluorescence spectra of the exciplex,while with 3,5-dinitrobenzoate moiety as the acceptor,only the fluorescence spectra of excited carbazolyl chromophore are observed.     

Studies on interactions of excited cadmium and mercury atoms with secondary and tertiary alkyl- and silylamines in gas phase

The Cd(³P₁)- and Hg(³P₁)-photosensitized emissions of some secondary and tertiary alkyl- and silylamines have been investigated under conditions of steady illumination at 493 and 298 K, respectively. The emission bands were observed at around 440 nm in the cadmium-photosensitized reactions of these amines. In contrast, no appreciable emission bands were observed in the mercury-photosensitized reactions of these amines. However, upon addition of tert-butyl alcohol to the amine-mercury system, an emission band evolved at around 350 nm in the mercury-photosensitization. The peak-wavelengths for secondary and tertiary alkyl- and silylamines are slightly shorter than the values predicted from the correlations between the peak wavelength and the first ionization energy obtained in the cadmium- and mercury-photosensitized luminescence of ammonia and primary amines. The quenching efficiencies of the cadmium and mercury resonance lines by secondary alkyl- and silylamines are higher than those by tertiary alkyl- and silylamines. These observations suggest that the steric hindrance by the alkyl and silyl groups to the approach of the nitrogen atom in the amines to excited cadmium and mercury atoms seems to be an important factor for the stabilization of the exciplexes and the quenching of the resonance lines. The behavior of silylamines is similar to that of alkylamines in cadmium- and mercury-photosensitized reactions.     

敏化型电致发光器件原理与技术

近年来,高性能荧光有机电致发光器件(FOLEDs)的开发受到了广泛关注。由于荧光材料仅能利用25%的单重态激子辐射发光,FOLEDs的外量子效率(EQE)理论极限为5%。通过能量转移,充分利用主体分子的单重态与三重态激子敏化荧光客体发光,可以提高激子利用率。目前敏化型FOLEDs(SFOLEDs)的最高EQE已达26.1%。本文详细介绍了SFOLEDs的敏化原理和机制,并根据敏化机制的不同,系统地总结了热活化延迟荧光敏化、激基复合物敏化、三重态湮灭敏化和局域电荷转移杂化激发态(HLCT)敏化等各类SFOLEDs的材料与器件结构特点及其研究进展。最后本综述对该类器件的研究前景进行了展望,期待吸引更多专业的研究人员的研究兴趣,进而推动该领域的发展。     

Analysis of the Effects of Protic,Aprotic, and Multi-Component Solvents on the Fluorescence Emission of Naphthalene and its Exciplex with Triethylamine

The emission spectra of naphthalene (NP)–triethylamine (TEA) systems were measured under steady-state illumination conditions in some protic and aprotic solvent-tetrahydrofuran (THF) mixtures. The fluorescence spectrum of the NP–TEA system in THF could be separated into two component bands (band A at 329 nm (fluorescence of NP) and band B at 468 nm (emission from an intermolecular exciplex)). The intensities of bands A and B decreased with increasing solvent polarity. The intensity of band B also decreased owing to the hydrogen-bonding interaction between TEA and protic solvents, but in this case the intensity of band A increased. The decrease in the intensity of band A with increasing solvent polarity is considered to be caused by the enhanced formation of an ion-pair parallel to the formation of an exciplex with increasing solvent polarity. The decrease in the intensity of band B is considered to be caused by the enhanced formation of ion-pair both parallel to and through the formation of the exciplex. The increase in the intensity of band A and the decrease in that of band B upon the addition of protic solvents is caused by the decrease in the concentration of free TEA. Acetonitrile only has a polar effect and trichloroacetic acid only has a hydrogen-bonding (protonation) effect, while alcohols have both the effects.     

Exciplex Formation and Excited State Deactivation of Difluoroborondipyrromethene (Bodipy) Dyads

Two series of geometrically‐related dyads are discussed based on the difluoroborondipyrromethene (Bodipy) unit, and incorporating covalently attached hydroquinone/quinone groups. These units are anchored directly, or via a phenylene spacer, to the Bodipy core at the meso position in one series ( BD‐MHQ , BD‐MQ , BD‐MPHQ , BD‐MPQ ), but for the second series the attachment site is the 2‐position ( BD‐SHQ , BD‐SQ , BD‐SPHQ , BD‐SPQ ). The compounds show various levels of fluorescence depending on the oxidation state of the appended group and the substitution pattern. In non‐polar solvents such as toluene, diethyl ether and dichlorobenzene, the S₁ state deactivation of the Bodipy unit in BD‐SPQ and BD‐MPQ is dominated by ^{1, 3}exciplex formation, which has not been reported for Bodipy derivatives so far. In the latter molecule, the decay of the exciplex is divided between population of the Bodipy triplet state (13 %–21 %) and ground state reformation. This partitioning is not seen for the side‐on substituted derivative, BD‐SPQ , and only ground state reformation is observed following decay of the exciplex. This difference in behavior is explained by the radical‐pair inter‐system‐crossing mechanism, which more effectively operates in BD‐MPQ because of the orthogonality of the donor‐acceptor units. In the more polar solvent CH₃CN all the quinone derivatives show fast formation of the charge‐separated state (k_CS) followed by slower charge recombination (k_CR). The ratio k_CS/k_CR≤80.     

Effect of variation of dielectric constant on the magnetic field modulation of exciplex luminescence

The effect of variation of dielectric constant on the relative magnetic field effect in singlet luminescence has been studied using a typical exciplex system at a saturating field. The study indicates strong specificity in the perturbation of the magnetic field effect by alcoholic solvents. In contrast to alcohols where relative singlet magnetic field effect is of the order of 2% only, the magnetic field effect in non-alcoholic medium reaches as high as 9%. Moreover, dielectric constant variation in alcohols yields curves which are distinctly different from those in non-alcoholic media. It turns out that this dependence of magnetic field effect on dielectric constant is similar in all non-alcoholic solvent mixtures. An analytical study based on Hong and Noolandi’s solution of Smoluchowski equation has been made. Derived expressions can interpret experimental curves reasonably well.     

有机电致发光中的电致激基复合物(英文)

获得了一种基于电致激基复合物的高效率白光有机电致发光器件,采用p-i-n结构,有效地降低了器件的工作电压。器件的最大亮度为9 050 cd/m2,最大功率效率为2.63 lm/W。随着电压的增加,器件的C IE色坐标一直处于白光区域。     

Development of Materials for Blue Organic Light Emitting Devices

The success of organic light emitting diodes (OLED) has been witnessed by the commercialization of this technology for manufacturing the vivid and colorful displays used in our daily life now. The prospective growth of OLED technology on display industry will be optimistic. Over the last three decades, many different approaches on material and device designs have been implemented for improving the efficiency and stability of OLED devices. These efforts install main cornerstones to support the great achievement of OLED technology. However, until now, the performance and stability of blue OLEDs still have some concerns. This troublesome issue should be totally conquered before the large‐scale manufactures dominated over other display technologies, particularly liquid crystal‐based displays, takes place. Though significant progress has already been made to achieve high performance and long lifetime blue OLEDs, this topic still remains as one of the hot researches in OLEDs. We have been working on this area for about two decades and made some notable contributions. Consequently, in this personal account we have outlined our efforts to obtain better performing blue OLEDs by utilizing a range of emitters based on fluorescence, phosphorescence, delayed fluorescence and exciplex systems. We have also developed some novel host materials for blue OLEDs, which are worth mentioning in this account.