不同聚合物分散剂对Pt/SAPO-11催化剂性能的影响

采用浸渍法制备了经过不同聚合物分散剂处理的Pt/SAPO-11催化剂,并通过X射线衍射(XRD)、透射电子显微镜(TEM)、N₂吸附-脱附和NH₃程序升温脱附(TPD)等对催化剂的组织结构进行了表征。结果表明,分散剂不会破坏催化剂的结构,反而提高了其孔体积、孔径和比表面积,同时改变了沸石的酸强度和酸量,其中以聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂孔体积、孔径和酸性分布最佳。在固定床反应器上对不同分散剂处理的Pt/SAPO-11催化剂催化性能进行评价,结果表明聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂也表现出最佳的催化性能,麻风树油的加氢脱氧率高达99.45%,生物航空煤油组分收率和异构烷烃组分(C₈~C₁₆)的选择性分别达到了44.67%和56.37%。     

阴离子分散剂对酸化膨润土流变性的影响

研究了阴离子分散剂聚丙烯酸钠对质量分数为10%的酸化膨润土分散体系流变性的影响. 结果表明, 添加0.4%分散剂的分散体系的剪切应力、表观黏度和屈服应力最低. 其它体系流体均表现为从假塑型到胀流型流体的转变, 而含0.4%分散剂的体系始终表现为胀流型流体. 采用Herschel-Bulkley模型对各体系的流变曲线进行了拟合, 得到较好的拟合曲线, 同时探讨了酸化膨润土分散体系的流变机理.     

聚醋酸乙烯类梳型分散剂的制备与表征

颜料在工业生产和人们的日常生活中起着重要的作用.由于颜料颗粒具有较大的比表面积和较高的比表面能,是热力学不稳定体系,当分散在介质中时容易发生团聚,影响其特性的发挥[1],因此需加入分散剂使其在分散介质中稳定分散.     

The dispersion of pigment slurries via incorporation with water-soluble sulfonate poly(ethylene terephthalate)

A water-soluble sulfonate poly(ethylene terephthalate) copolymer has been synthesized and identified as a high-temperature endurable surfactant. The glass-transition temperature and the storage modulus increase in correlation to the increase in sulfonate content. Various characterization studies were performed, including light scattering, zeta-potential measurement and a sedimentation test. The results suggest that at equal numbers of sulfonate units in a solution, a low concentration of a dispersant of high sulfonate content is more effective than a high concentration of a dispersant of low sulfonate content. Received: 6 April 2000 Accepted: 23 September 2000     

Nanoparticle Halos Mechanism in Stabilizing of Colloidal Suspensions: Polymeric Binder and Dispersant Effects

Dispersion behavior of colloidal Al₂O₃ aqueous suspensions was investigated in the presence of highly charged CeO₂ nanoparticles and polymeric additives. It was found that among the investigated parameters, ceria nanoparticles concentration had the highest significant effect on the stability of Al₂O₃-CeO₂ suspensions. However, the low influence of dispersant concentration may be due to significant role of ceria nanoparticles stabilizing alumina microspheres by “nanoparticle halo” formation. The stabilization of the bidispersed suspensions was also evidenced by scanning electron microscopy and elemental analysis of the sediment layers after three weeks.     

丙烯酰胺共聚合及产物分散性的研究

采用水溶性引发体系研究了丙烯酰胺的均聚以及与几种乙烯基单体的共聚反应。探讨了引发剂、温度、单体浓度及加热时间对所得聚合物相对分子质量及其分散性能的影响。对产物的结构特性和相对分子质量分布进行了表征,并考察了共聚物的分散性能。丙烯酰胺共聚物同均聚物相比,分散性能有明显的改善。     

Facile Iron‐Mediated Dispersant‐Free Suspension Polymerization of Methyl Methacrylate via Reverse ATRP in Water

An iron‐mediated reverse ATRP of methyl methacrylate (MMA) is successfully carried out in water in the absence of any dispersants, using a water‐soluble 2,2′‐azobis(2‐methylpropionamidine) dihydrochloride (V‐50) as the initiator and the stabilizer, and using an oil‐soluble N,N‐butyldithiocarbamate ferrum (Fe(S₂CN(C₄H₉)₂)₃) as the catalyst without adding any additional ligands. Micron‐sized PMMA particles with UV light‐sensitive ‐S₂CN(C₄H₉)₂ end group are obtained, and monomer droplet nucleation and suspension polymerization mechanism are proposed. Polymerization results demonstrated typical “living”/controlled characteristics of ATRP: first‐order polymerization kinetics, linear increase of molecular weights with monomer conversion and narrow molecular weight distributions for the resultant PMMA particles. NMR spectroscopy and chain‐extension experiments under UV light irradiation confirm the attachment and livingness of UV light‐sensitive ‐S₂CN(C₄H₉)₂ group in the chain end.

     

SDBS对氧化铜纳米颗粒悬浮液粘度的影响

由氧化铜纳米颗粒、分散剂和水组成的悬浮液粘度是研究其流动与换热的重要基础数据。本文通过实验得出分散剂是影响纳米悬浮液粘度的决定性因素这一结论。研究表明,本文采用的纯分散剂溶液即十二烷基苯磺酸钠(SDBS)水溶液的粘度对温度变化很敏感,氧化铜纳米颗粒质量分数的增加对粘度的影响并不明显,而分散剂浓度对粘度的影响远远超过纳米颗粒质量分数对粘度的影响。     

Stabilization of gamma alumina slurry for chemical-mechanical polishing of copper

Stabilization of gamma-alumina suspension for chemical-mechanical polishing (CMP) of copper was investigated. Citric acid and poly(acrylic acid) (PAA) (M(w)=5000) were used as dispersant. The stability of suspension was evaluated from the changes in viscosity, particle size and zeta potential. It appears that metastable gamma-alumina mainly due to its high specific surface area and to the presence of aluminol groups on its surface is progressively transformed to bayerite (beta-Al(OH)(3)) by hydration procedure. Citric acid molecules were adsorbed onto gamma-alumina surface effectively and exhibited the excellent hydration inhibition effect. Although citrate-alumina surface complexes give barrier to the flocculation, the repulsion potential is based mainly on the electrostatic repulsion, thereby steric hindrance caused by the adsorption of these small molecules is very weak. The electrosteric repulsion, which provides more effective dispersion stability than electrostatic repulsion force, can be expected by using polyelectrolyte such as PAA; however, adsorbed layers of PAA onto solid/liquid interface are loosely formed. Therefore, a large amount of PAA was required to inhibit the surface hydration of gamma-alumina suspension, thereby the excess addition of PAA decreased the electrosteric repulsion and re-bridging of the dispersant between particles caused an increase in suspension viscosity. Therefore, synergistic effect can be expected in mixed dispersant system of citric acid and PAA, since small citric acid molecules are adsorbed faster than PAA, inhibiting the progress of surface hydration, and then adsorbed PAA layers exhibit the effective electrosteric repulsion interaction between particles with a small amount compared with PAA alone. It was revealed that the gamma-alumina slurry dispersed by mixed dispersant exhibited the improved removal rate of Cu layer by CMP polishing test.     

水煤浆添加剂与煤之间的相互作用规律研究 Ⅰ. 复合煤颗粒间的相互作用对水煤浆流变性的影响

使用12种不同分散剂对14种不同变质程度的煤进行了成浆性实验，分析了182个水煤浆(CWS)样品的流变性。结果表明，低变质程度和高灰煤浆多呈屈服假塑性，煤的性质起主导作用；变质程度高且灰分较低煤浆的流变性，主要依赖于分散剂的结构与性质；分子结构单元立体空间效应大，疏水基团与亲水基团呈立体间隔分布的分散剂，易形成屈服假塑性CWS；分子线度长，亲水基团与疏水基团呈线性间隔分布的分散剂，易形成胀塑性CWS。复合煤粒间的相互作用方式是决定CWS流变特性的关键。