Structured water chains in external electric fields

ABSTRACT

We study the structural, energetic and electronic properties of the structured water chain clusters within the density functional theory. We refer the structured water chains to those water clusters that have specific geometric patterns stretched along one direction. External electric field required to keep the structures open chain, thereby preventing them to form closed structures, is applied along the length of the chain. The structures are essentially periodic with basic repeating unit consisting of the corner- or edge-sharing 4-, 5- or 6-membered ring water clusters. Our calculations underscore the possible existence of such structured water clusters in the electrostatic environments, which we simulate in its simplicity employing a dipolar, uniform and static electric field. Analysis reveals that the 5-membered ring water chain clusters, i.e. the pentamer chain clusters have the lowest average dipole moment per water molecule while the threshold field, that marks the onset of the field-induced closure of the HOMO (highest occupied molecular orbital)-LUMO (lowest unoccupied molecular orbital) energy gap, is highest, followed by that for the tetramer and hexamer chains. The results suggest that the pentamer chains are the most stable clusters over a wide range of electric fields.     

Optimization of anionic conductivity through the coexistence of ionomer cluster and backbone-backbone morphologies in anion exchange membranes

Random copolymers of poly(4-vinylpyridine) and polyisoprene were synthesized, and subsequently quaternized with 1-alkylbromides. The number of carbons on the pendant side-chain of the resultant comb-shaped polymer, n, ranged from 2–8. The comb-shaped polymers were crosslinked employing thiol-ene chemistry to give mechanically robust ion conducting membranes. Analysis by wide and medium-angle X-ray scattering show three morphology regimes that are dependent on the number of carbons on the pendant side-chains. When n = 2, ionomer cluster morphology was dominant, when n = 8 backbone-backbone morphology was dominant, and when n = 3–6, the membrane showed a coexistence of both ionomer cluster and backbone-backbone morphologies. Evaluation of the water uptake of the membranes showed a maximum water uptake per cation of 9.5 when n = 5 at 95% relative humidity (RH) and 60°C. Conductivity of the samples characterized by electrochemical impedance spectroscopy showed bromide conductivity as high as 110 mS/cm when n = 3 at 95% RH and 90°C.     

消光式核壳二聚体传感器的设计与光谱特性分析

根据ITO/Au纳米核壳二聚体粒子在生物医学领域的应用合理性,设计了一种实时检测生物液体的核壳二聚体探针消光式传感器;由偶极子理论推导出输出波长与外界环境折射率关系;利用MATLAB设计ITO/Au纳米核壳二聚体粒子结构;采用软件DDSCAT7.3结合离散偶极近似法,利用二聚体有效半径模拟计算了300~950nm可见光到红外光波段不同核壳比、二聚体间距、以及不同介质折射率的消光光谱;根据传感芯片折射率与偶极共振、耦合八级共振的响应关系得出ITO/Au二聚体的折射率灵敏特性。与传统Ag/Au核壳纳米粒子相比,ITO/Au纳米核壳二聚体结构引入了可作为传感芯片灵敏性自参考参数的耦合八级共振峰,同时ITO/Au二聚体结构的折射率灵敏度可达到419nm/RIU。这些工作及其结果对制作消光式传感器具有重要的意义。     

Self-Assembly of C3 Symmetric Rigid Macrolactams into Very Polar and Porous Trigonal Crystals

Cyclohexane and cyclotri-β-alanyl have been used as scaffolds for the design of new C₃-symmetric rings incorporating conjugated alkenes and dienes. All three C₃-symmetric lactams share the same triangular shape and their crystal system is trigonal. They all belong to the R3 space group, R3m, R3 and R3c, for the increasingly large 12-, 18- and 24-membered rigid rings, respectively. All lactams stack on top of each other, through H-bonds and van der Waals noncovalent interactions, leading to endless supramolecular cylinders and tubes. The largest member of the family leads to tubes, the central pores of which is wide enough to let water in. A common feature of all the lactams is their very large dipole, of around 9 D, according to DFT calculations. Surprisingly, all the resulting cylinders and tubes pack side by side in the crystals, with all the dipoles pointing to the same direction. As a result, all three crystals are anisotropic and appear to be the first members of a new kind of highly polar crystals.     

Surface charging behaviors of electrocatalytic interfaces with partially charged chemisorbates

The surface charge is a key concept in electrochemistry. Mathematically, the surface charge is obtained from a spatial integration of the volume charge along a particular direction. Ambiguities thus arise in choosing the starting and ending points of the integration. As for electrocatalytic interfaces, the presence of chemisorbates further complicates the situation. In this minireview, I adopt a definition of the surface charge within a continuum picture of the electric double layer. I will introduce surface charging behaviors of firstly ordinary electrochemical interfaces and then electrocatalytic interfaces featuring partially charged chemisorbates. Particularly, the origin of nonmonotonic surface charging behaviors of electrocatalytic interfaces is explained using a primitive model. Finally, a brief account of previous studies on the nonmonotonic surface charging behavior is presented, as a subline of the spectacular history of electric double layer.     

Photoluminescence of green nanophosphors Sr2MgSi2O7 doped with Tb3+ under 374-nm excitation

A series of Sr₂MgSi₂O₇:Tb³⁺ nanophosphors is prepared using a high-temperature solid-state reaction. The x-ray diffraction patterns show that the crystal structure of the sample is not significantly affected by Tb³⁺ ions. However, the images of the scanning electron microscope illustrate that the average size of nanoparticles becomes larger with the increase of Tb³⁺ concentration. Unlike earlier investigations on down-conversion emission of Tb³⁺ ion excited by deep ultraviolet light, in this work, the photoluminescence characteristics of Sr₂MgSi₂O₇ nanophosphors doped with different Tb³⁺ concentrations are analyzed under 374-nm excitations. The intense green emission at 545 nm is observed at an optimal doping concentration of 1.6 mol%. The main reason for the concentration quenching is due to the electric dipole-electric dipole interaction among Tb³⁺ ions.     

Exo conformers of N‐(pyridin‐2‐yl)‐ and N‐(pyridin‐3‐yl)norbornene‐5,6‐dicarboximide crystals

Two isomeric pyridine‐substituted norbornenedicarboximide derivatives, namely N‐(pyridin‐2‐yl)‐exo‐norbornene‐5,6‐dicarboximide, (I), and N‐(pyridin‐3‐yl)‐exo‐norbornene‐5,6‐dicarboximide, (II), both C₁₄H₁₂N₂O₄, have been crystallized and their structures unequivocally determined by single‐crystal X‐ray diffraction. The molecules consist of norbornene moieties fused to a dicarboximide ring substituted at the N atom by either pyridin‐2‐yl or pyridin‐3‐yl in an anti configuration with respect to the double bond, thus affording exo isomers. In both compounds, the asymmetric unit consists of two independent molecules (Z′ = 2). In compound (I), the pyridine rings of the two independent molecules adopt different conformations, i.e. syn and anti, with respect to the methylene bridge. The intermolecular contacts of (I) are dominated by C—H...O interactions. In contrast, in compound (II), the pyridine rings of both molecules have an anti conformation and the two independent molecules are linked by carbonyl–carbonyl interactions, as well as by C—H...O and C—H...N contacts.     

Three 1‐phenylindolin‐2‐one derivatives displaying different molecular dipole moments and different crystallographic symmetries

Three 1‐phenylindolin‐2‐one derivatives, namely 1‐phenylindolin‐2‐one, C₁₄H₁₁NO, (I), 5‐bromo‐1‐phenylindolin‐2‐one, C₁₄H₁₀BrNO, (II), and 5‐iodo‐1‐phenylindolin‐2‐one, C₁₄H₁₀INO, (III), have been synthesized and their structures determined. Compounds (I) and (II) crystallized in the centrosymmetric space groups Pbca and P2₁/c, respectively, while compound (III) crystallized in the polar space group Aea2. Density functional theory (DFT) calculations show that the molecular dipole moment gradually decreases in the order (I) > (II) > (III). The relatively smaller dipole moment of (III) and the larger non‐electrostatic intermolecular interactions may be the main reasons for the noncentrosymmetric and polar structure of (III).     

Selectivity in micellar catalysed reactions: The role of interfacial dipole,compartmentalisation, and specific interactions with the surfactants

Micellar catalysis is playing a major role in green chemistry with ever increasing applications in the efficient and sustainable preparation of natural compounds, drugs, and more recently organic semiconductors for printed electronics. Most of the contributions in the field focus on the developments of surfactants and suitable formulative conditions capable of reproducing – and often improving – the yield of reactions commonly performed in organic solvents. The real ambition of the micellar catalysis approach goes beyond the improvement in the sustainability of existing methods and aims at mimicking not only the efficiency but also the selectivity of enzymatic catalysis. This review summarizes relevant examples of micellar catalysis enabled, efficient, and selective transformations, and discusses the different kind of processes impacting on the product distribution depending on the details of the formulative state achieved.     

Applicability of medium-size basis sets in calculations of molecular dynamic polarisabilities

Static and dynamic average polarisabilities and polarisability anisotropies of seven linear non-polar and polar molecules are calculated within the CCS, CC2, and CC3 approximations using a range of medium-sized basis sets: the polarised LPol-n (n = ds, dl, fs, fl), the aug-pc-n (n = 1, 2), the def2-SVPD, and -TZVPD basis sets. Reference values are obtained using a hierarchy of Dunning's (d-)aug-cc-pVXZ (X = D, T, Q, 5) basis sets. The results are discussed together with the available CCSD values in terms of basis set and correlation method errors, and their ratio. Detailed analysis shows that already the def2-SVPD basis set can be used in CCS polarisability calculations. When affordable, the slightly larger aug-pc-1 basis set is recommended, as it leads to significant reduction of basis set error. The def2-TZVPD, LPol-ds, and aug-pc-2 basis sets are optimal choice within the CC2 approximation, with the latter allowing to approach the CC2 basis set limit. The LPol-ds, -dl, and def2-TZVPD sets outperform the aug-cc-pVTZ set in average polarisability CCSD calculations, with the def2-TZVPD being competitive to other reduced-size sets also in determination of polarisability anisotropy. The aug-pc-2 basis is a particularly attractive choice for CCSD, giving the accuracy of aug-cc-pVQZ at a significantly reduced computational cost. The polarisability anisotropy is shown to be more computationally demanding than the average polarisability, in particular with respect to the accuracy of the correlation method and an accurate evaluation of this property requires at least the CCSD model.