具有高隔离度的双陷波超宽带多入多出天线

提出了一款具有高隔离度的双陷波超宽带多入多出(UWB MIMO)天线。该天线由两个相同的半切超宽带天线单元倒置构成。通过在天线底板刻蚀栅栏型缺陷地解耦结构,使该MIMO天线的隔离度提高至25 dB。此外,在天线半圆形辐射贴片上刻蚀两个方向相反的"L"型缝隙,实现了双陷波的功能,分别抑制了802.16无线城域网WiMAX(3.2~3.7 GHz)和WLAN(5.15~5.85 GHz)信号对天线系统的干扰。实验结果表明,该天线在3~11 GHz工作带宽内的隔离度大于25 dB,包络相关系数(ECC)小于0.004;第一个陷波频段为3.0~3.7 GHz,第二个陷波频段为5.1~5.85 GHz,有效抑制了WiMAX和WLAN的信号干扰。     

1D NMR Homodecoupled 1H Spectra with Scalar Coupling Constants from 2D NemoZS‐DIAG Experiments

A two‐dimensional liquid‐state NMR experiment cleanly separating chemical shifts and scalar couplings information is introduced. This DIAG experiment takes advantage of a drastic reduction of the spectral window in the indirect dimension to be quickly recorded and of a new non‐equidistant modulation of the selective pulse to improve the sensitivity of the broadband homodecoupling Zangger–Sterk sequence element by one order of magnitude. A simple automatic analysis results in 1D spectra displaying singlets and lists of the scalar couplings for first‐order multiplets. This facilitates the analysis of 1D spectra by resolving multiplets based on their differences in chemical shifts and coupling structures.     

Li-defect interactions in electron-irradiated n-type silicon by EPR measurements

Single crystal silicon, both with and without oxygen, has been diffused with lithium to concentrations ～10¹⁷/cm², irradiated with 1 to 1.5 MeV electrons, and the ensuing defects studies by EPR measurements. The presence of oxygen strongly affects the properties of these defects. Measurements have indicated the presence of two new defects which involve Li-one in O-containing material and one in O-free material. The defects are observed in their electron-filled state, and indicate a net electron spinof ½. The defect spectra disappear (with time) at room temperature, and can be explained by the formation of other Li-involved defects which lie deeper in the energy bandgap and are not visible by EPR. Electron irradiation at 40 °K followed by annealing at higher temperatures show that both EPR defects described above begin to form at about 200 °K and begin to decrease at about 275 °K-just as does the 250 °K reverse annealing observed generally for n-type Si. Based on these data, and the work of others, it is suggested that both defects form as a result of the motion of Si interstitials which produce a (Li-O-interstitial) complex in O-containing Si, and a (Li-interstitial) complex in O-free Si.     

基于假设脱钩区间模型的省际节能减排压力测算以辽宁省为例

参照资源消耗及废物排放与经济增长的定量表达式-IGT方程和IGTX方程,分别推导出资源脱钩指数和二氧化碳排放指数方程.根据脱钩指数,将二氧化碳排放与GDP脱钩程度分为绝对脱钩、相对脱钩和未脱钩三种程度,并构建了假设相对脱钩和假设绝对脱钩区间.以辽宁省1995-2012年间二氧化碳排放量和GDP增长量为对象,分析了二者的脱钩关系.研究发现,除了1997和1999年二者处于相对脱钩状态,其余年份均未脱钩.运用假设脱钩区间模型,分别计算达到相对脱钩和绝对脱钩状态的二氧化碳年排放理想值,并与现值进行比较,得到各年节能减排的压力值.研究结果表明:相对脱钩的压力相对较小,减排压力在0-1671万t之间,占基准年碳排放量的0%-12.23%;绝对脱钩的压力较大,减排压力在320.77-4899.84万t,占基准年碳排放量的2.35%-23.94%.     

An ALE finite element method for a coupled Stefan problem and Navier–Stokes equations with free capillary surface

In this article, an ALE finite element method to simulate the partial melting of a workpiece of metal is presented. The model includes the heat transport in both the solid and liquid part, fluid flow in the liquid phase by the Navier–Stokes equations, tracking of the melt interface solid/liquid by the Stefan condition, treatment of the capillary boundary accounting for surface tension effects and a radiative boundary condition. We show that an accurate treatment of the moving boundaries is crucial to resolve their respective influences on the flow field and thus on the overall energy transport correctly. This is achieved by a mesh‐moving method, which explicitly tracks the phase boundary and makes it possible to use a sharp interface model without singularities in the boundary conditions at the triple junction. A numerical example describing the welding of a thin‐steel wire end by a laser, where all aforementioned effects have to be taken into account, proves the effectiveness of the approach.Copyright © 2012 John Wiley & Sons, Ltd.     

Numerical analysis for the mixed Navier–Stokes and Darcy Problem with the Beavers–Joseph interface condition

In this article, we consider the coupled Navier–Stokes and Darcy problem with the Beavers–Joseph interface condition. With suitable restrictions of physical parameters α and ν, we prove the existence and local uniqueness of a weak solution. Then we propose a coupled finite element scheme and a decoupled and linearized scheme based on two‐grid finite element. Under suitable further restrictions, their optimal error estimates are obtained. Finally numerical experiments indicate the validity of the theoretical results as well as the efficiency and effectiveness of the decoupled and linearized two‐grid algorithm. © 2014 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 1009–1030, 2015     

Aromatic spectral editing techniques for magic-angle-spinning solid-state NMR spectroscopy of uniformly 13C-labeled proteins

The four aromatic amino acids in proteins, namely histidine, phenylalanine, tyrosine, and tryptophan, have strongly overlapping ¹³C chemical shift ranges between 100 and 160 ppm, and have so far been largely neglected in solid-state NMR determination of protein structures. Yet aromatic residues play important roles in biology through π–π and cation–π interactions. To better resolve and assign aromatic residues' ¹³C signals in magic-angle-spinning (MAS) solid-state NMR spectra, we introduce two spectral editing techniques. The first method uses gated ¹H decoupling in a proton-driven spin-diffusion (PDSD) experiment to remove all protonated ¹³C signals and retain only non-protonated carbon signals in the aromatic region of the ¹³C spectra. The second technique uses chemical shift filters and ¹H–¹³C dipolar dephasing to selectively detect the Cα, Cβ and CO cross peaks of aromatic residues while suppressing the signals of all aliphatic residues. We demonstrate these two techniques on amino acids, a model peptide, and the microcrystalline protein GB1, and show that they significantly simplify the 2D NMR spectra and both reveal and permit the ready assignment of the aromatic residues' signals.