Diffusion Model of a Non-Integer Order PIγ Controller with TCP/UDP Streams

In this article, a way to employ the diffusion approximation to model interplay between TCP and UDP flows is presented. In order to control traffic congestion, an environment of IP routers applying AQM (Active Queue Management) algorithms has been introduced. Furthermore, the impact of the fractional controller PIγ and its parameters on the transport protocols is investigated. The controller has been elaborated in accordance with the control theory. The TCP and UDP flows are transmitted simultaneously and are mutually independent. Only the TCP is controlled by the AQM algorithm. Our diffusion model allows a single TCP or UDP flow to start or end at any time, which distinguishes it from those previously described in the literature.     

Optimal time delays in a class of reaction-diffusion equations

ABSTRACT

A class of semilinear parabolic reaction diffusion equations with multiple time delays is considered. These time delays and corresponding weights are to be optimized such that the associated solution of the delay equation is the best approximation of a desired state function. The differentiability of the mapping is proved that associates the solution of the delay equation to the vector of weights and delays. Based on an adjoint calculus, first-order necessary optimality conditions are derived. Numerical test examples show the applicability of the concept of optimizing time delays.     

Synchronization of complex networks with time‐varying inner coupling and outer coupling matrices

Synchronization of complex networks with time‐varying coupling matrices is studied in this paper. Two kinds of time‐varying coupling are taken into account. One is the time‐varying inner coupling in the node state space and the other is the time‐varying outer coupling in the network topology space. By respectively setting linear controllers and adaptive controllers, time‐varying complex networks can be synchronized to a desired state. Meanwhile, different influences of the control parameters of linear controllers and adaptive controllers on the synchronization have also been investigated. Based on the Lyapunov function theory, we construct appropriate positive‐definite functions, and several sufficient synchronization criteria are obtained. Numerical simulations further illustrate the effectiveness of conclusions. Copyright © 2017 John Wiley & Sons, Ltd.     

电磁轴承系统的刚度阻尼特性分析

分析了电磁轴承系统的刚度阻尼特性与系统结构参数及其控制器频响特性之间的关系。给出了系统控制电流的相位对系统稳定性和刚度阻尼特性的影响。提出了电磁轴承系统的复阻尼概念，以及部分刚度阻尼特性指标的实际意义和计算方法。     

一种改进的AUVs变结构滑模控制策略研究

针对现有的变结构滑模控制切换面单一性会导致系统状态在原点处收敛缓慢的缺陷,对自主式水下机器人(AUVs)变结构滑模控制设计了折线型的切换面,并且进一步改进实现了速度控制和定点定速控制。改进的切换面由斜率不同的自线段构成,并在拐点处通过S型函数光滑过渡。将切换面的斜率减小到0时,则可以实现速度控制,同时为了消除速度控制的稳态误差,引进了采用能智积分方法的积分项。最后在某AUV上进行仿真实验,结果证实了应用折线型切换面可以减少控制系统的上升时间,提高反应速度;速度控制的稳态误差接近0,并很好地实现定点定速的控制效果。该方法可以有效用于AUVs的控制。     

基于动态布谷鸟搜索算法的PID控制器参数优化

针对传统PID控制器参数优化费时且不能保证获得最佳性能,提出一种基于动态布谷鸟搜索算法的PID控制器参数优化方法。布谷鸟搜索算法(CS)具有参数少、搜索能力强等特点,但是标准布谷鸟搜索算法参数采用固定值,极大地影响了算法的性能,因此提出了动态布谷鸟搜索算法(DCS),DCS算法采用动态参数,算法性能明显改善。仿真试验结果表明基于动态布谷鸟搜索算法的PID控制器具有较好的控制性能指标。     

改进蚁群PID-神经元解耦的CFB锅炉燃烧系统控制

床温和主汽压都是循环流化床锅炉生产运行中的重要参数,会直接影响机组的安全性和经济性。但由于这两者对象存在非线性、大时延、强耦合等特点,其现场控制效果一直不太理想。本文首先采用自适应神经元将床温和主汽压解耦,再利用具有分工特征的蚁群算法优化参数的PID控制器对两者进行独立控制。采用该算法优化常规PID控制参数,能够实现控制参数的快速寻优。该方案应用于循环流化床锅炉燃烧系统仿真,结果表明能有效实现系统解耦,且具有响应快、超调量小等优点,有效地提高了控制品质。     

鲁棒PDF控制策略在永磁同步电机系统中的设计及仿真

对电机控制系统的经典反馈设计方案是建立在简化的受控对象模型基础之上,而实际模型参数的变化会引起控制系统性能的改变。本文针对实际应用的永磁同步电机,为了保证电机控制系统的强鲁棒性,通过对其系统灵敏度的理论推导,给出了一种新的控制器参数设计方法。该设计方法以系统灵敏度为评价指标来度量系统的鲁棒性,结合应用于二阶控制对象的伪微分反馈控制器结构,来削弱控制对象参数值的改变对控制系统性能的影响。并建立了精确的永磁同步电机仿真模型,将该方法应用于其速度控制。仿真结果表明在该控制方案下,在永磁同步电机的转动惯量和定子电阻值变化时具有较小超调量变化(小于4%)的响应特性。同时与普通PID控制对比分析,验证了用该方案设计的PMSM调速系统具有较高的抗参数变化的鲁棒性。     

基于自适应模糊控制的节能装置研究

针对凹版印刷干燥设备,设计节能装置,该装置利用压缩机换热原理,对余热进行再循环利用。设计自适应模糊PID节能控制系统,完成对压缩机,调功器,变频器的实时控制。利用组态软件完成系统界面设计,人机交互简洁,操作方便。控制算法采用自适应模糊PID控制,依靠数据信息来调整模糊逻辑系统的参数,通过在线计算得到最佳控制器参数,抑制不确定性对系统的影响。将节能装置应用到凹版印刷机,实验数据显示,系统耗能减少,效率得到提高,达到节能目的,证明了节能系统的有效性,具有较强的应用价值。