规格化对高斯消元法计算速度的影响

从计算原理和计算速度两个方面详细地分析比较规格化对求解线性方程组的高斯消元法在消元和回代过程中的影响，其中包括计算公式的变化、计算元素的计算次数、规格化元素的计算次数、计算所有元素所需的元素总数、对复数矩阵和实数矩阵的计算速度的影响等内容的比较，并对 IEEE-57、－118、－300节点系统进行编程比较计算。计算结果表明，高斯消元法中规格化的计算虽极为简单，且对回代环节的影响不大，但可以大大提高前代环节的计算速度，从而大大提高求解线性方程组的计算速度，尤其是对复数矩阵。该结论同样适用于电力系统等各个工程领域用高斯消元方法求解线性方程组。     

非均匀波导中的声聚焦

理论研究了声波在非均匀波导中的空间聚焦问题,利用多模态导纳法构建波导内任意位置处声压与入射声压在模态域的映射关系,计算使声波聚焦于空间某位置时的最佳入射波,并画出了相应的聚焦声场.研究了三种非均匀情况:水平变截面波导、含散射体波导以及声速垂直变化波导.结果表明,当输入最佳入射波时,在非均匀波导中可以产生良好的单点或多点声聚焦效果,声波的聚焦过程充分地利用了波导结构及介质非均匀性对声波的散射作用.     

主动隔振下固支薄板基础振动抑制的参数多目标优化

考虑动力设备-隔振器-薄板基础为复合主动隔振体系,并将薄板视为固支形式;以传递力作用在薄板基础上某点导纳为中间变量,在传递力、导纳、薄板振动峰值位移及峰值点距离影响因素分析的基础上,进行了系统耦联参数的多目标优化研究。优化算法采用较新的强度Pareto进化算法(SPEA2),该算法具有参数设置少、收敛速度快、寻优能力强及Pareto最优解分布均匀等优点。目标函数考虑为薄板振动的位移峰值及峰值点间的距离,目的是在有效控制薄板振动的同时,尽可能地使薄板趋于单峰值点振动,这对于板上附属操作设备及工作人员是有利的;最后,在最优参数的基础上对隔振器的安装位置进行讨论研究。数值计算结果表明,本文方法可有效地计算出隔振系统的最优参数,并为工业建筑及其他工程振动的最优隔振设计提供新思路。     

Influence of Ga/(Ga + In) grading on deep‐defect states of Cu(In,Ga)Se2 solar cells

The benefits of gallium (Ga) grading on Cu(In,Ga)Se₂ (CIGS) solar cell performance are demonstrated by comparing with ungraded CIGS cells. Using drive‐level capacitance profiling (DLCP) and admittance spectroscopy (AS) analyses, we show the influence of Ga grading on the spatial variation of deep defects, free‐carrier densities in the CIGS absorber, and their impact on the cell's open‐circuit voltage V_oc. The parameter most constraining the cell's V_oc is found to be the deep‐defect density close to the space charge region (SCR). In ungraded devices, high deep‐defect concentrations (4.2 × 10¹⁶cm^–3) were observed near the SCR, offering a source for Shockley–Read–Hall recombination, reducing the cell's V_oc. In graded devices, the deep‐defect densities near the SCR decreased by one order of magnitude (2.5 × 10¹⁵ cm^–3) for back surface graded devices, and almost two orders of magnitude (8.6 × 10¹⁴ cm^–3) for double surface graded devices, enhancing the cell's V_oc. In compositionally graded devices, the free‐carrier density in the absorber's bulk decreased in tandem with the ratio of gallium to gallium plus indium ratio GGI = Ga/(Ga + In), increasing the activation energy, hindering the ionization of the defect states at room temperature and enhancing their role as recombination centers within the energy band. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Reflection of Pulse Waves and Resonance Characteristics of Arterial Beds

The problem of axisymmetric wave flow of a viscous incompressible fluid in a system consisting of a long thin deformable tube and a terminal element that determines the conditions of wave reflection at the tube end is analyzed. An expression for the input admittance of the system is obtained and the dependence of the admittance on the system parameters is investigated. The resonant frequencies at which the admittance amplitude has extrema are found and it is shown that at these frequencies the admittance variations with variation of the terminal-element parameters are maximal. The dependence of the resonant frequency on the tube length is investigated. Possible applications of the results obtained to the hydromechanical interpretation of a novel method of pulse diagnostics are discussed.     

Modelling of inflow-conditions for vortex particle methods to simulate atmospheric turbulence and its induced aerodynamic admittance on line-like bluff bodies

ABSTRACT

This paper presents a novel method for the simulation of aerodynamic admittance of turbulent wind on bluff line-like structures using a pseudo 3D model of Vortex Particle Method (VPM). The method is a computationally efficient extension of the 2D VPM, where a coupled set of simulation slices accounts for the 3D nature of the oncoming wind flow. Pre-computed vortex particles are seeded in each of the parallel 2D simulation slices in order to model the turbulent velocity perturbations. Here, the modelling of the inflow seeding particles is enhanced, reducing the computational cost and allowing extendibility into quasi 3D domain. This a priori computation of the seeding vortex particles is based on modelling the atmospheric turbulence characteristics. The method is applied to simulate turbulent flow around an infinitesimally thin flat-plate, to asses its validity at the viscous-rotational boundary layer, which is important for accurate fluid-structure Interaction simulations. Furthermore, sensitivity analysis to different attributes is assessed     

近红外消偏振分光膜设计近红外消偏振分光膜设计

大角度倾斜入射时,光学薄膜表现出强烈的偏振效应。入射光S分量和P分量的反射率和透射率曲线,以及反射或透射引起的两个分量的相位变化都不再相同,彼此有一定的偏振分离。通过对产生偏振效应内在原因的分析,采用一个在近红外波段对于45倾斜入射光的S分量和P分量等效导纳非常接近的膜系结构,结合单纯形法优化算法,设计得到一个1 500～1 600 nm范围内反射率都是50％的近红外消偏振分光膜。结果显示,在45入射时,S分量和P分量的反射率曲线偏振分离小,反射和透射引起的相位变化也控制在很小范围。     

System for measuring optical admittance of a thin film stack

A new method based on the polarization interferometer structure has been applied to measure the optical admittance, the refractive index and thickness of a thin film. The structure is a vibration insensitive optical system. There is one Twyman-Green interferometer part to induce a phase difference and one Fizeau interferometer part to induce the interference in the system. The intensities coming from four different polarizers were measured at the same time to prevent mechanical vibration influence. Using the polarization interferometer, the optical admittance, the refractive index and thickness of a single layer of Ta₂O₅ thin film has been measured. The measurement results were compared with the results obtained by ellipsometer. The results meet reasonable values in both refractive index and thickness.     

Synthesis and optical and transport properties of a phenyl‐substituted polythiophene

The synthesis and characterization of a novel polythiophene substituted with a 2′‐pentyloxy‐5′‐(1″′‐oxooctyl) phenyl group (PPOPT) is reported. The bulk transport properties of thin films of PPOPT are investigated by admittance spectroscopy. The dramatic effect of the phenyl side chain on the mobility of positive carriers in films of PPOPT is described. The photophysics of PPOPT in both solution and thin film is also investigated and correlated to substituent‐driven intrachain and interchain arrangements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

宽截止窄带高反射滤光膜设计

窄带高反射滤光膜在光通讯、光学探测仪器等领域有着重要应用.探讨了"基片|H(LH)m1aL(HL)m2βCr,M|空气"膜系结构的窄带高反射滤光膜系,讨论了金属Cr层厚度,以及两种不同的匹配膜系对滤光膜特性的影响,计算了Cr层内部的电场分布.结果表明,较厚的金属层可实现更宽的截止带宽,匹配层的加入有效地实现了宽截止带的深截止,使中心波长处导纳为较大值的匹配膜系可以更好地实现滤光膜宽截止、窄带高反射特性;匹配膜层使中心波长处Cr层内部的电场强度趋于零,有效地降低了整个膜系的吸收,提高了反射率.