Structural and optical properties of Au-implanted ZnO films

The structural and luminescence related optical behaviours of Au ion implanted ZnO films grown by magnetic sputtering and their post implantation annealing behaviours in the temperature range of 100-700 °C have been investigated. Optical absorption and transmittance spectra of the films indicate that band edge of Au-implanted ZnO has shifted to high energy range and optical band gap has increased, because the sharp difference of thermal expansion induces the lattice mismatch between ZnO and SiO₂. PL spectra reveal that UV and visible luminescence bands of ZnO films can be improved after thermal annealing due to recovery of defects and Au ions incorporation. Importantly, green luminescence band of 530 nm has been only observed in the Au-implanted and subsequently annealed ZnO films and it enhances with the increasing annealing temperature, which can be related to Au atoms or clusters in ZnO films. Furthermore, X-ray photoelectron spectroscopy measurements reveal that the Au⁰ is dominant state in Au implanted and annealed ZnO films. Possible mechanisms, such as optical transitions of Au atoms or clusters and deep level luminescence of ZnO, have been proposed for green emission.     

Formation of GaAs1−xNx nanofilm on GaAs by low energy N2 implantation

Nitridation of GaAs (1 0 0) by N₂⁺ ions with energy E_i = 2500 eV has been studied by Auger- and Electron Energy Loss Spectroscopy under experimental conditions, when electrons ejected only by nitrated layer, without contribution of GaAs substrate, were collected. Diagnostics for quantitative chemical analysis of the nitrated layers has been developed using the values of NKVV Auger energies in GaN and GaAsN chemical phases measured in one experiment, with the accuracy being sufficient for separating their contributions into the experimental spectrum. The conducted analysis has shown that nanofilm with the thickness of about 4 nm was fabricated, consisting mainly of dilute alloy GaAs_1−xN_x with high concentration of nitrogen x ∼ 0.09, although the major part of the implanted nitrogen atoms are contained in GaN inclusions. It was assumed that secondary ion cascades generated by implanted ions play an important role in forming nitrogen-rich alloy.     

The important role of Mn in the room-temperature ferromagnetism of Mn-doped GaN films

Mn-doped GaN films (Ga_1−xMn_xN) were grown on sapphire (0 0 0 1) using Laser assisted Molecular Beam Epitaxy (LMBE). High-quality nanocrystalline Ga_1−xMn_xN films with different Mn concentration were then obtained by thermal annealing treatment for 30 min in the ammonia atmosphere. Mn ions were incorporated into the wurtzite structure of the host lattice by substituting the Ga sites with Mn³⁺ due to the thermal treatment. Mn³⁺, which is confirmed by XPS analysis, is believed to be the decisive factor in the origin of room-temperature ferromagnetism. The better room-temperature ferromagnetism is given with the higher Mn³⁺ concentration. The bound magnetic polarons (BMP) theory can be used to prove our room-temperature ferromagnetic properties. The film with the maximum concentration of Mn³⁺ presents strongest ferromagnetic signal at annealing temperature 950 °C. Higher annealing temperature (such as 1150 °C) is not proper because of the second phase Mn_xGa_y formation.     

Structure and magnetic properties of SmCoxTi0.4-1:7 ribbons

SmCo_xTi_0.4 (x=6.6, 7.1, 7.6, 8.1) ribbons have been prepared by melt spinning at a wheel speed of 42 m/s, followed by annealing at 750 °C for 2 h. Both as-spun and as-annealed ribbons possess the disordered TbCu7-type (1:7) phase even when the Sm/(Co,Ti) atomic ratio deviates from 1/7. The c/a ratio increases with increasing Co concentration x, but the unit cell volume decreases. The Curie temperatures show above 700 °C, increasing from 707 °C for x=6.6 to 782 °C for x=8.1. The saturation magnetizations increase almost linearly with increasing Co content. The observed magnetic hardening is believed to arise from the high magnetocrystalline anisotropy of the 1:7 phase and the fine nanograin structure. The intrinsic coercivity of 9797 Oe has been obtained in the melt-spun SmCo_7.1Ti_0.4 ribbons.     

Micromagnetic modeling for heat-assisted magnetic recording

Heat-assisted magnetic recording (HAMR) is one of the candidate systems beyond the perpendicular recording technology. Here, a micromagnetic model and a heat transfer model are introduced to study the heating and cooling processes in the HAMR media; then, by integration of the SPT head and the laser heating source, the recording performance is simulated and investigated on a single track at an area density of 1 Tb/in². In the HAMR system, the temperature in the medium under the laser wave guide is increased by heating, and decreased by air bearing and heat conduction when the write process really occurred. The target of this study is to find the proper design of the head-laser assembly for optimum recording. It is found that the proper distance between the laser wave guide and the head's main pole rear/front edge is only 41.4/1.4 nm for optimum recording performance.     

Magnetic circuit of a contactless torque sensor for electric power steering

Modern passenger cars are increasingly equipped with electromechanical steering assist rather than hydraulic systems known for many decades. Major benefits are reduced fuel consumption (up to 0.2l/100 km) and increased functionality. As such a system reacts to the drivers input in terms of steering torque or steering effort, a sensor is required that accurately measures the steering torque. Valeo has adopted a magnetic technology and has improved the performance by adding specially designed flux concentration devices. The magnetic circuit consists of a multi-pole ring magnet and a pair of ring-shaped soft magnetic parts rotating together with the steering shaft and an additional pair of soft magnetic flux concentration devices which are fixed stationary inside the housing. The steering torque causes a relative twist between magnet and the soft magnetic rings, therefore implementing a proportional magnetisation of the latter. A U-shape was chosen for the flux concentration devices in order to compensate mechanical tolerances of the system. The main focus of this paper will be on the tolerance behaviour of the sensor system and the impact of the flux concentration devices. Because of the nonlinear nature of the magnetisation curve of the NiFe alloy used extensive 3D FEM simulation was necessary. Simulation enables us to have a look inside the soft magnetic material and predict the spatial magnetisation distribution with the benefit of avoiding saturation. The result is an optimised sensor, which meets both the harsh environmental conditions inside the motor compartment as well as the cost pressure in the automotive business.     

The magnetic properties of Be-codoped GaMnN grown via molecular beam epitaxy

GaMnN and Be-codoped GaMnN were grown via molecular beam epitaxy using a single GaN precursor and their structural and magnetic properties were examined. X-ray diffraction and superconducting quantum interference device (SQUID) measurements revealed that the grown layers are homogeneous without precipitates. The saturation magnetization of GaMnN has increased from ∼4 to ∼16 emu/cm³ via codoping of Be. The d–d exchange interaction between Mn atoms was discussed for the ferromagnetism of GaMnN.     

Magnetization and specific heat studies of RNi4Ga (RSm,Gd and Tb)

In order to elucidate the anomalous magnetic properties in the ferromagnetically ordered state of SmNi₄Ga GdNi₄Ga and TbNi₄Ga, we have carried out a detailed study with magnetization and specific heat (SH) measurements. GdNi₄Ga shows the possibility of a filled 3d band and a helical spin arrangement below the ordering temperature. TbNi₄Ga shows a dominant crystal field effect resulting in a deviation of T_C from the de-Gennes scaling and possible Schottky anomalies in the SH. SmNi₄Ga shows a large coercivity at low temperatures. A rough estimate of the domain wall thickness in SmNi₄Ga gives a value of 8 Å.     

Isospin symmetry breaking in ρ→πγ decay

In terms of effective field theory and mixed-propagator approach, we show that there is a larger hidden effect of isospin breaking in ρ→πγ decay due to a ω exchange, ρ→ω→πγ. The branching ratio is predicted as B(ρ→πγ) = (11.67±2.0)×10^-4, which is much larger than Particle Data Group's datum (6.8±1.7)×10^-4 and one of charged mode, B(ρ^±→π^±γ) = (4.5±0.5)×10^-4. Received: 7 January 2002 / Accepted: 2 April 2002     

Synthesis and magnetic properties of CoFe2O4 ferrite nanoparticles

CoFe₂O₄ ferrite nanoparticles were prepared by a modified chemical coprecipitation route. Structural and magnetic properties were systematically investigated. X-ray diffraction results showed that the sample was in single phase with the space group . The results of field-emission scanning electronic microscopy showed that the grains appeared spherical with diameters ranging from 20 to 30 nm. The composition determined by energy-dispersive spectroscopy was stoichiometry of CoFe₂O₄. The Curie temperature in the process of increasing temperature was slightly higher than that in the process of decreasing temperature. This can be understood by the fact that heating changed Co²⁺ ion redistribution in tetrahedral and in octahedral sites. The coercivity of the synthesized CoFe₂O₄ samples was lower than the theoretical values, which could be explained by the mono-domain structure and a transformation from ferrimagnetic to superparamagnetic state.