Experimental study of the cavitation noise and vibration induced by the choked flow in a Venturi reactor

In this paper, the cavitation performance and corresponding pressure pulsation, noise and vibration induced by the choked cavitating flow in a Venturi reactor are investigated experimentally under different cavitation conditions by using high-speed camera and high frequency sensors. Based on the instantaneous continuous cavitation images, the Proper Orthogonal Decomposition (POD), a tool to analyze the large-scale cavitation flow structure, is applied to investigate the choked cavitating flow dynamics. The POD results show that two mechanisms, re-entrant jet flow mechanism and shock wave mechanism, govern the shedding and collapse of cavitation cloud at different pressure ratios. These mechanisms contribute to the variation of pressure pulsation, noise and vibration at different pressure ratios. The pressure pulsation spectrum behaves differently in various cavitation regions induced by the choked cavitating flow. Due to the existence of low pressure in re-entrant region, the influence of high frequency fluctuation on pressure pulsation caused by re-entrant flow is small. Moreover, with the increase of pressure ratio, the induced noise and vibration intensity decreases gradually, then increases and reaches a maximum value. Finally, it drops to a low and stable level. Despite different inlet pressures, the intensity of cavitation noise and vibration reaches the maximum value at the same pressure ratio. Specifically, the FFT analysis of noise and vibration signals indicates that low frequency component prevails at small pressure ratio owing to the re-entrant jet mechanism, while high frequency component prevails at large pressure ratio owing to the shock wave mechanism. The relationship between the choked cavitation dynamics and the induced pressure pulsation, noise and vibration in the Venturi reactor is highlighted. The results can provide guidance for the optimal operation condition of the Venturi reactor for cavitation applications such as water treatment.     

Wave-based vibration control of large cable net structures

Large cable net structures have been widely applied in aerospace engineering due to the feature of light-weight, high packaging efficiency, and high thermal stability. Structural vibrations induced by a variety of disturbances are inevitable in the space environment, resulting in the requirement of effective vibration control strategies for large cable net structures. Since the large cable net structures have many closely spaced vibrational modes in the range of low frequencies, traditional modal based control may cause modal truncation and spillover problems. In this paper, a wave-based boundary control strategy is adopted and its effectiveness to control the vibration of cable net structures is investigated, by transfer function analysis and numerical methods. It is found that the structural vibration can be absolutely resisted by applying the wave-based boundary controllers onto all the exterior nodes, when disturbances come from the external boundaries of the cable net. Our results in this paper can provide a theoretical basis for the vibration control of large cable net structures.     

Influence of moisture and CO2 on the material behavior of thermoplastic elastomers for beer bottle closures

Metal closures with a polymer-based sealing for beer bottles have been known since the late nineteen-sixties. However, to what extent which parameter of the polymer sealing gasket plays a role in closure performance to keep the beer quality to a highest level possible is not fully understood. For this purpose three thermoplastic elastomer (TPE) liners were investigated by differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectrometry, dynamical mechanical analysis (DMA), scanning electron microscopy (SEM) and surface roughness in order to understand the effect of relative humidity (RH) and carbon dioxide (CO₂) on their physical and chemical properties as well as their macromolecular structures. The TPEs’ viscoelasticity in the frequency domain under different isothermal conditions was evaluated. RH and CO₂ were effective for changes in thermomechanical and surface properties. Liner C was found to have lower seal performance attributed to its relatively higher crystallinity, stiffness, weaker bond structure and rougher surface. Vibrations can lead to seal leakage in Liner B due to its higher damping behavior during production and transportation. Liner A outperforms others due to stabile behavior within the operational temperature range.     

Passive vibration absorber effect on the machining surface quality of a flexible workpiece

This paper presents a study of the vibratory behaviour of a flexible workpiece subject to a milling end operation. Indeed, this vibratory behaviour is critical, especially when the excitation frequency is near to the resonance. For this reason, passive vibration suppression is considered in order to attenuate the dynamic response of the milled workpiece and decrease the dynamic effect on the resulting machined surface roughness and flatness. In order to confirm the efficiency of the passive vibration suppression, the vibratory behaviour and the quality (roughness and flatness) of a machined surface are studied without and with passive absorber (TMD) using a finite-element model.     

The banded spherulites of iPP induced by pressure vibration injection molding

Isotactic polypropylene(i PP) samples obtained by pressure vibration injection molding(PVIM) and conventional injection molding(CIM) were studied by polarized-light microscopy(PLM), respectively. It was found that the alternating bright and dark banded spherulites were generated in the transitional region of PVIM parts. It is the first time that the banded spherulites of isotactic polypropylene were observed in polymer processing. What's more, the banded spherulites were proved to be constituted of ?-form crystal by hot stage polarized-light microscopy(HT-PLM) and wide angle X-ray diffraction(WAXD). Morphology of the banded spherulites was also studied by scaning electronical microscopy(SEM).     

Parametric excitation of waves on a free boundary of a horizontal fluid layer

We consider the dynamical stability of horizontal fluid layer, performing harmonic oscillations in vertical direction. The continued fractions approach allowed us to avoid the conventional restriction to the case of small viscosity and almost-resonant frequencies. Our numerical results cover a wide range of the parameters (viscosity, amplitude and frequency of the oscillation, and depth of the layer). To cite this article: V.I. Yudovich et al., C. R. Mecanique 332 (2004).     

The effect of dynamical self-orientation and its applicability for identification of natural frequencies

The effect of dynamical self-orientation and its applicability for the identification of natural frequencies of the investigated systems is demonstrated in this paper. Unidirectional vibration exciter is fixed to the investigated systems via a pivot link and can rotate around it. It is shown that the exciter changes its orientation in the steady state motion mode when the frequency of excitation sweeps over the fundamental frequency of the examined system. Approximate analytical analysis of the discrete system illustrates the basic principle of the effect of dynamical self-orientation. Numerical analysis of both the discrete and different continuous elastic systems confirms the applicability of the effect of self-orientation for the identification of natural frequencies.     

Static and free vibration analysis of laminated glass beam on viscoelastic supports

Static behavior and free vibration analysis of laminated glass beam on viscoelastic supports are performed. For the static case, an analytical way is developed for analyzing and optimization of laminated glass beam with general restraints at the boundaries. In the case of free linear vibrations, the modal properties of the glass are determined using a finite element method which is a powerful tool in the design of support damping treatment of a sandwich glass for passive vibration control.     

液体密度测量实验改进的研究

利用电动音叉仪测量液体密度,分析原实验仪器存在的不足,对原实验装置做了改进。通过测量水的密度,结果显示改进后的实验仪器不但提高了测量的精确度,而且操作更快捷、方便。     

大型电力变压器线圈轴向非线性振动研究

本文对具有非线性特性的变压器线圈在稳态及短路电动力下的轴向动态响应进行了单自由度和多自由度的理论和数值研究，对提出的安匝平衡时的单自由度力学模型，分别利用多惊讶法和打靶法进行了稳态响应的解析和数值分析，并对打靶法中差商阵的求法进行了改进，减少了计算工作量，对于典型的单柱式变压器线罪状系统建立了非线性多自由度模型，进行了短路响应数值分析，得出了响应特征及其和变压器各参数之关系，同时，进行了模型变压器短路试验，进行了轴向动态响应力等一系列测量，分析结果与试验结果相符。