Generation and characterization of air micro-bubbles in highly hydrophobic capillaries

The generation of air microbubbles in microfluidic systems or in capillaries could be of great interest for transportation (single cell analysis, organite transportation) or for liquid compartmentation. The physicochemical characterization of air bubbles and a better understanding of the process leading to bubble generation during electrophoresis is also interesting in a theoretical point of view. In this work, the generation of microbubbles on hydrophobic Glaco™ coated capillaries has been studied in water-based electrolyte. Air bubbles were generated at the detection window and the required experimental parameters for microbubbles generation have been identified. Generated bubbles migrated against the electroosmotic flow, as would do strongly negatively charged solutes, under constant electric field. They have been characterized in terms of dimensions, electrophoretic mobility, and apparent charge.     

Preparation of superhydrophobic composite paper mulching film

To study the influence of different concentrations of zinc oxide (ZnO)/silicon dioxide (SiO₂) composite coating on hydrophobic property and mechanical stability of paper mulch film, three kinds of ZnO/SiO₂ composite coating paper mulch films (2%, 4%, 6%) with different coating substance contents were prepared by brush coating method. Through particle size analysis, contact angle, rolling angle and mechanical stability test, combined with scanning electron microscope, three-dimensional morphology and roughness measuring instrument, the optimal concentration of ZnO/SiO₂ composite coated paper mulch film was screened out. Through acid-base salt corrosion test, silver mirror reaction and surface self-cleaning, the optimal concentration of composite coated paper mulch film was compared with the original paper mulch film to prove its excellent chemical stability and hydrophobicity. The results show that the paper mulch film with 4% coating material has excellent hydrophobicity and mechanical stability, can effectively reduce the surface roughness of paper mulch film, and has remarkable effects in resisting acid, alkali and salt and self-cleaning.     

A superhydrophobic magnetic elastomer actuator for droplet motion control

For the fast droplet transportation on an open surface, a new magnetic elastomer with a superhydrophobic surface has been developed. Because the surface is superhydrophobic, the water droplet can easily roll off on the surface. The movement of the droplet was controlled by a deliberate local deformation of the surface of the elastomer induced by magnetic actuation. The direction and speed of the droplet motion was easily controlled by changing the surface topography using magnetic force. We also demonstrate the applicability of the devices as a new type of open‐surface digital microfluidics using a simple chemical reaction. Copyright © 2013 John Wiley & Sons, Ltd.     

A multi-functional polymer coating that is heat-resistant,hydrophobic and transparent

A multi-functional polymer film with high hydrophobicity and transparency was formed by simple casting of a polycarbonate solution onto a substrate having micro-scale roughness.The high hydrophobicity was heat-resistant,which can be retained up to 390 ℃.The polymer film may have potentially wide-ranging applications in industry and high technology.     

Controlled water flooding of polymer electrolyte fuel cells applying superhydrophobic gas diffusion layer

Water transport is critical to the successful implementation of polymer electrolyte fuel cells (PEFC), especially in long-term and dynamic operation in automotives. Liquid water appears in the fuel cells not only from the water generated at the cathode catalyst layer but also as a result of condensation of water vapor from the humidified gases. In this study, we report a simple approach to prepare a superhydrophobic gas diffusion layer by chemical vapor deposition of polydimethylsiloxane without significant change in pore size of gas diffusion layer unlike other approach adding hydrophobic agent such as polytetrafluoroethylene. A superhydrophobic coating on the GDL can be obtained, leading to exceptionally enhanced power performance and stability of PEFC especially at a high current where water transport becomes more critical.     

Strong and Superhydrophobic Wood with Aligned Cellulose Nanofibers as a Waterproof Structural Material†

Lightweight structural materials are important for the energy efficiency of applications, particularly those in the building sector. Here, inspired by nature, we developed a strong, superhydrophobic, yet lightweight material by simple in situ growth of nano‐SiO₂ and subsequent densification of the wood substrate. In situ generation of SiO₂ nanoparticles both inside the wood channels and on the wood surfaces gives the material superhydrophobicity, with static and dynamic contact angles of 159.4^o and 3^o, respectively. Densification of the wood to remove most of the spaces among the lumen and cell walls results in a laminated, dense structure, with aligned cellulose nanofibers, which in turn contributes to a high mechanical strength up to 384.2 MPa (7‐times higher than natural wood). Such treatment enables the strong and superhydrophobic wood (SH‐Wood) to be stable and have excellent water, acid, and alkaline resistance. The high mechanical strength of SH‐Wood combined with its excellent structural stability in harsh environments, as well its low density, positions the strong and superhydrophobic wood as a promising candidate for strong, lightweight, and durable structural materials that could potentially replace steel.     

Fabrication and surface characterization of biomimic superhydrophobic copper surface by solution-immersion and self-assembly

Biomimic superhydrophobic surfaces with contact angle greater than 150° and low sliding angle on copper substrate were fabricated by means of a facile solution immersion and surface self-assembly method. The scanning electron microscopy showed a nanoneedle structure copper surface with sporadic flower-like aggregates after treatment with sodium hydroxide and potassium persulfate solution. X-ray photoelectron spectroscopy and X-ray diffraction results confirmed that the formed nanoneedles were crystallized Cu(OH)₂. And the hydrophilic Cu(OH)₂ surface can be further modified into superhydrophobic through surface self-assembly with dodecanoic acid.     

Superhydrophobicity of silica nanoparticles modified with polystyrene

Polystyrene/silica nanoparticles were prepared by radical polymerization of silica nanoparticles possessing vinyl groups and styrene with benzoyl peroxide. The resulting vinyl silica nanoparticles, polystyrene/silica nanoparticles were characterized by means of Fourier transformation infrared spectroscopy, scanning electron microscopy and UV-vis absorption spectroscopy. The results indicated that polystyrene had been successfully grafted onto vinyl silica nanoparticles via covalent bond. The morphological structure of polystyrene/silica nanoparticles film, investigated by scanning electron microscopy, showed a characteristic rough structure. Surface wetting properties of the polystyrene/silica nanoparticles film were evaluated by measuring water contact angle and the sliding angle using a contact angle goniometer, which were measured to be 159° and 2°, respectively. The excellent superhydrophobic property enlarges potential applications of the superhydrophobic surfaces.     

Fabrication of superhydrophobic polyaniline films with rapidly switchable wettability

A superhydrophobic polyaniline (PANI) film has been fabricated by using a facile one-step spraying method. The PANI was synthesized via in situ doping polymerization in the presence of perfluorooctanoic acid (PFOA) as the dopant. The water contact angle of this superhydrophobic surface reaches to 156°. Both the surface chemical compositions and morphological structures were analyzed. A granular morphology of PANI with a moderate amount of nanofibers was obtained. Moreover, a rapid surface wettability transition between superhydrophobicity and superhydrophilicity can be observed when it is doped with PFOA and de-doped with base. The mechanism for this tunable wettability has been discussed in detail.     

A simple solution-immersion process for the fabrication of superhydrophobic cupric stearate surface with easy repairable property

The present work reports a simple and time-saving method to fabricate cupric stearate film on zinc substrate by a solution-immersion process. Superhydrophobic surfaces are conventionally prepared employing two steps: roughening a surface and lowering its surface energy. The fabrication of superhydrophobic cupric stearate surface is reported using a one-step process by immersing a zinc plate coated with copper into the stearic acid solution, simplifying the complexity of two different steps involved in the conventional methods. The surface of the zinc plate coated with copper is found to be covered with low surface energy cupric stearate film providing the water contact angle of 160 ± 1° with the rolling off properties. In addition, the damaged superhydrophobic surface can restore superhydrophobicity property by immersing the surface into the stearic acid solution again.