Fiber-optic reflex sensor for in-line production measurement

The paper describes experiments concerning distance measurement with fiber-optic sensor and improvement of the measurement principle. The sensor probe was well-designed with a small structure and multi-function. The novel optical fiber probe arrangement as well as the possibilities of use for complex measurement problems are explained using the measurement of an internal screw thread as an example. The experimental results show that the measurement uncertainty of the thread minor diameter can reach ±10 μm, and the stability of the measurement system is better than 0.07%.     

Controllable growth and characterizations of hybrid spiral-like atomically thin molybdenum disulfide

Monolayer MoS₂ is an emerging two-dimensional semiconductor with wide-ranging potential applications in novel electronic and optoelectronic devices. Here, we reported controlled vapor phase growth of hybrid spiral-like MoS₂ crystals investigated by multiple means of X-Ray photoemission spectroscopy, scanning electron microscopy, atomic force microscopy, kelvin probe force microscopy, Raman and Photoluminescence techniques. Morphological characterizations reveal an intriguing hybrid spiral-like MoS₂ feature whose lower planes are AB Bernal stacking and upper structure is spiral. We ascribe the hybrid spiral-like structure to a screw dislocation drive growth mechanism owing to lower supersaturation and layer-by-layer growth mode. In addition, the electrostatic properties of MoS₂ microflakes with hybrid spiral structures are obvious inhomogeneous and dependent on morphology manifested by kelvin probe force microscopy. Our work deepens the understanding of growth mechanisms of CVD-grown MoS₂, which is also adoptable to other TMDC materials.     

The effect of noise on the dirac phase of electron in the presence of screw dislocation

The effect of noise on the Dirac phase of electron in the presence of screw dislocation is studied. An uncorrelated noise, which coincides with the nature of thermal fluctuations, is adopted. Results indicate that the Dirac phase is robust against the existing noise in the system.     

A screw dislocation near a non-elliptical piezoelectric inhomogeneity with internal uniform electroelastic field

Conformal mapping and analytic continuation are employed to prove the existence of an internal uniform electroelastic field inside a non-elliptical piezoelectric inhomogeneity interacting with a screw dislocation. We focus specifically on the case when the piezoelectric matrix surrounding the inhomogeneity is subjected to uniform remote anti-plane mechanical and in-plane electrical loading and a constraint is imposed between the remote loading and the screw dislocation. The constraint can be expressed in a relatively simple decoupled form by utilizing orthogonality relationships between two corresponding eigenvectors. The internal uniform electroelastic field is found to be independent of the presence of the screw dislocation; moreover, it can be expressed in decoupled form.     

DEM investigation on conveying of non-spherical particles in a screw conveyor

Screw conveyors are extensively used in modern industry such as metallurgy, architecture and pharmaceutical due to their high-efficiency in the transportation of granular materials. And substantial efforts have been devoted to the study of the screw conveyors. Numerical method is an effective way to study screw conveyor. However, previous studies have mainly focused in the regime of spherical particles while the in-depth investigations for non-spherical particles that should be the most encountered in practical applications are still limited. In view of the above situations, discrete element method (DEM), which has been widely accepted in simulating the discrete systems, is utilized to investigate the conveying process of non-spherical particles in a horizontal screw conveyor, with particles being modeled by super-ellipsoids. In addition, a wear model called SIEM (Shear Impact Energy Model) is incorporated into DEM to predict the wear of screw conveyor. The DEM simulation results demonstrate that the particle shape is influential for the flow behaviors of particles and the wear of conveyor. The conveying performance evaluated quantitatively of both mass flow rate and power consumption is subsequently obtained to investigate the effect of sphericity of particle with different operation parameters. Moreover, particle collision frequency and collision energy consumption are acquired to investigate the possible particle breakage between particles and screw blade. The comparisons between particle–particle collision and particle–wall collision reveal that particles with large shape index have more possibility to be damaged in particle–wall impingement.     

Anti-plane elastodynamic analysis of planes with multiple defects

The solution of a screw dislocation under time-harmonic condition is obtained in an infinite isotropic plane by means of the Fourier transform method. The stress components reveal the familiar Cauchy singularity at the location of dislocation. The solution is employed to derive integral equations for a plane weakened by cracks and cavities. Cavities are considered as closed curved cracks without singularity. Several examples are solved and the stress intensity factor of cracks and hoop stress on cavities are obtained.     

Interaction between a screw dislocation and an elastic elliptical inhomogeneity with interfacial cracks

The elastic interaction between a screw dislocation and an elliptical inhomogeneity with interfacial cracks is studied. The screw dislocation may be located outside or inside the inhomogeneity. An efficient complex variable method for the complex multiply connected region is developed, and the general solutions to the problem are derived. As illustrative examples, solutions in explicit series form for complex potentials are presented in the case of one or two interfacial cracks. Image forces on the dislocation are calculated by using the Peach-Koehler formula. The influence of crack geometries and material properties on the image forces is evaluated and discussed. It is shown that the interfacial crack has a significant effect on the equilibrium position of the dislocation near an elliptical-arc interface. The main results indicate, when the length of the crack goes up to a critical value, the presence of the interfacial crack can change the interaction mechanism between a screw dislocation and an elliptical inclusion. The present solutions can include a number of previously known results as special cases.The project supported by the National Natural Science Foundation of China(10272009 and 10472030) and the Natural Science Foundation of Hunan Province(02JJY2014)     

Interaction of a screw dislocation with a notch in a piezoelectric bi-material

Summary The electro-elastic interaction of a screw dislocation and a notch in a piezoelectric bi-material is analyzed. The electro-elastic fields induced by the dislocation are derived using the conformal mapping and the image-dislocation approach, where the solution for a piezoelectric bi-material without a notch is used as a base. The stress and the electric displacement intensity factors of the notch and the image force on the dislocation are given explicitly. We find that intensity factors are expressed in terms of the effective material constants, while the radial component of the image force is independent of the notch angle and the angular position of the dislocation in the polar coordinate system. Numerical results for the image force are provided for the use when one of the two media is purely elastic. They illustrate the behavior of the dislocation in the neighborhood of the notch.     

Anti-plane elastodynamic analysis of orthotropic planes weakened by several cracks

Stress analysis is carried out in an orthotropic plane containing a Volterra-type dislocation, the distributed dislocation technique is employed to obtain integral equations for an orthotropic plane weakened by cracks under time-harmonic anti-plane traction. The integral equations are of Cauchy singular type at the location of dislocation which are solved numerically. Several examples are solved and the stress intensity factors for multiple cracks with different configuration are obtained.