Salt effect on molecular orientation at air/liquid methanol interface

The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy(SFG-VS). We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.     

Effect of high intensity ultrasound on gelation properties of silver carp surimi with different salt contents

Surimi from silver carp with different salt contents (0–5%) was obtained treated by high intensity ultrasound (HIU, 100 kHz 91 W·cm⁻²). The gelation properties of samples were evaluated by puncture properties, microstructures, water-holding capacity, dynamic rheological properties and intermolecular interactions. As the salt content increased from 0 to 5%, gel properties of surimi without HIU significantly improved. For samples with low-salt (0–2% NaCl) content, HIU induced obvious enhancement in breaking force and deformation. HIU promoted the protein aggregation linked by SS bonds, hydrophobic interactions and non-disulfide covalent bonds in surimi gels with low-salt content. Moreover, microstructures of HIU surimi gels with low-salt content were more compact than those of the corresponding control samples. HIU also improved the gelation properties of surimi with 3% NaCl to an extent. However, for high-salt (4–5% NaCl) samples, HIU decreased the breaking force and deformation of surimi gels due to the degradation of proteins suggested by increased TCA-soluble peptides. In conclusion, HIU effectively improved the gelation properties of surimi with low-salt content (0–2% NaCl), but was harmful for high-salt (4–5% NaCl) surimi. This might provide the theoretical basis for the production of low-salt surimi gels.     

Salt Metathesis: Tetrafluoroborate Anion Rapidly Fluoridates Organoboronic Acids to give Organotrifluoroborates

Tetrafluoroborate (BF₄⁻) has long been used as a spectator counter anion. Herein, we report an unprecedented salt metathesis between a variety of BF₄⁻ salts and a series of organoboronic acids yielding the corresponding organotrifluoroborates. We identified conditions for fast and efficient fluoridation (<1 h) with minimal workup. Fundamentally, this work discloses the proclivity of BF₄⁻ to exchange fluoride atoms with organoboronates, highlighting the lability of BF₄⁻.     

Overall Carbon-neutral Electrochemical Reduction of CO2 in Molten Salts using a Liquid Metal Sn Cathode

An overall carbon-neutral CO₂ electroreduction requires enhanced conversion efficiency and intensified functionality of CO₂-derived products to balance the carbon footprint from CO₂ electroreduction against fixed CO₂. A liquid Sn cathode is herein introduced into electrochemical reduction of CO₂ in molten salts to fabricate core–shell Sn−C spheres (Sn@C). An in situ generated Li₂SnO₃/C directs a self-template formation of Sn@C. Benefitting from the accelerated reaction kinetics from the liquid Sn cathode and the core–shell structure of Sn@C, a CO₂-fixation current efficiency higher than 84 % and a high reversible lithium-storage capacity of Sn@C are achieved. The versatility of this strategy is demonstrated by other low melting point metals, such as Zn and Bi. This process integrates energy-efficient CO₂ conversion and template-free fabrication of value-added metal-carbon, achieving an overall carbon-neutral electrochemical reduction of CO₂.     

Sulfonium Salts as Acceptors in Electron Donor-Acceptor Complexes

The photoactivation of electron donor-acceptor complexes has emerged as a sustainable, selective and versatile strategy for the generation of radical species. Electron donor-acceptor (EDA) complexation, however, imposes electronic constraints on the donor and acceptor components and this can limit the range of radicals that can be generated using the approach. New EDA complexation strategies exploiting sulfonium salts allow radicals to be generated from native functionality. For example, aryl sulfonium salts, formed by the activation of arenes, can serve as the acceptor components in EDA complexes due to their electron-deficient nature. This “sulfonium tag” approach relaxes the electronic constraints on the parent substrate and dramatically expands the range of radicals that can be generated using EDA complexation. In this review, these new applications of sulfonium salts will be introduced and the areas of chemical space rendered accessible through this innovation will be highlighted.     

流动注射-分光光度法测定河口水中氨氮的盐效应及校正

建立了流动注射-分光光度法测定河口水中氨氮的盐效应的校正办法。样品溶液中的钙离子、镁离子是造成盐效应的主要因素。低盐区域(盐度0~10)随盐度增加,校正系数迅速降低;高盐区域(盐度10~30)随盐度增加,校正系数缓慢增加。氨氮的线性范围为3.00~300μg·L-1,方法的检出限(3S/N)为1.97μg·L-1。对20.0μg·L-1氨氮标准溶液连续测定7次,测定值的相对标准偏差为4.5%。用标准加入法做方法的回收试验,测得回收率在80.7%~108%之间。     

表面活性剂对部分水解聚丙烯酰胺溶液抗盐性的影响

通过实验研究了阴离子表面活性剂(SDS)、非离子表面活性剂(OP-10)、两性表面活性剂(C12BE)浓度及KCl浓度对部分水解聚丙烯酰胺(阴离子型,HPAM)水溶液黏度的影响规律,进而分析各因素对聚合物溶液抗盐性的影响。实验结果表明:当表面活性剂浓度低于临界缔合浓度CAC时,聚合物溶液黏度变化不大;高于CAC后,随着表面活性剂浓度增大,聚合物溶液黏度急剧增加;当表面活性剂浓度达到聚合物饱和浓度PSP时,聚合物溶液黏度达到最大值;再加入阴离子和两性表面活性剂,将导致黏度降低,而加入非离子表面活性剂不再改变聚合物溶液的黏度,无机盐KCl对聚合物溶液有双重作用,低浓度KCl促进聚合物溶液黏度升高,高浓度KCl则导致聚合物溶液黏度急剧降低后趋于稳定,在相同KCl浓度下,三种表面活性剂的抗盐能力表现为:SDSOP-10C12BE。     

Microwire Chronoamperometric Determination of Concentration,Diffusivity, and Salinity for Simultaneous Oxygen and Proton Reduction

A microwire chronoamperometric method is reported employing a 25 µm diameter platinum microwire for multi‐parameter electroanalysis with digital simulation‐based evaluation (employing DigiElch 4.F). Concentration and diffusion coefficient data are obtained for the reduction of oxygen and for the reduction of protons individually and simultaneously in saline (0.1 M to 4.0 M NaCl) electrolyte media. The diffusion coefficient and concentration data for oxygen allows salinity levels to be estimated. The microwire chronoamperometry method offers versatility and precision due to (i) a slow approach to steady state (when compared to microdisc methods) and (ii) insignificant viscosity effects (when compared to hydrodynamic methods).     

Proteome profile of salt gland‐rich epidermis extracted from a salt‐tolerant tree species

Preparation of proteins from salt‐gland‐rich tissues of mangrove plant is necessary for a systematic study of proteins involved in the plant's unique desalination mechanism. Extraction of high‐quality proteins from the leaves of mangrove tree species, however, is difficult due to the presence of high levels of endogenous phenolic compounds. In our study, preparation of proteins from only a part of the leaf tissues (i.e. salt gland‐rich epidermal layers) was required, rendering extraction even more challenging. By comparing several extraction methods, we developed a reliable procedure for obtaining proteins from salt gland‐rich tissues of the mangrove species Avicennia officinalis. Protein extraction was markedly improved using a phenol‐based extraction method. Greater resolution 1D protein gel profiles could be obtained. More promising proteome profiles could be obtained through 1D‐LC‐MS/MS. The number of proteins detected was twice as much as compared to TUTS extraction method. Focusing on proteins that were solely present in each extraction method, phenol‐based extracts contained nearly ten times more proteins than those in the extracts without using phenol. The approach could thus be applied for downstream high‐throughput proteomic analyses involving LC‐MS/MS or equivalent. The proteomics data presented herein are available via ProteomeXchange with identifier PXD001691.