Photocatalytic and superhydrophilicity properties of N-doped TiO2 nanothin films

Pure TiO₂ and nitrogen doped titanium dioxide (N-TiO₂) thin films were prepared by sol-gel method through spin coating on soda lime glass substrates. TiCl₄ and urea were used as Ti and N sources in the sol. XRD results showed nitrogen doping has retarded anatase to rutile phase transformation. The doping also leads to a decrease in roughness of the samples from 4 nm (TiO₂) to 1 nm (N-TiO₂). However, surface analysis by statistical methods reveals that both surfaces have self-affine structure. Optical band gap of thin films was shifted from 3.65 eV (TiO₂) to 3.47 eV (N-TiO₂). Hydrophilic conversion and photocatalytic degradation properties of thin films were investigated and exhibited that N-TiO₂ thin film has more preferable hydrophilicity and photocatalytic properties under UV illumination.     

Enantioseparation of dansyl amino acids and dipeptides by chiral ligand exchange capillary electrophoresis based on Zn(II)-l-hydroxyproline complexes coordinating with γ-cyclodextrins

A chiral ligand exchange capillary electrophoresis (CLE-CE) method using Zn(II) as the central ion and l-4-hydroxyproline as the chiral ligand coordinating with γ-cyclodextrin (γ-CD) was developed for the enantioseparation of amino acids (AAs) and dipeptides. The effects of various separation parameters, including the pH of the running buffer, the ratio of Zn(II) to l-4-hydroxyproline, the concentration of complexes and cyclodextrins (CDs) were systematically investigated. After optimization, it has been found that eight pairs of labeled AAs and six pairs of labeled dipeptides could be baseline-separated with a running electrolyte of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM Zn(II), 6.0 mM l-hydroxyproline and 4.0 mM γ-CD at pH 8.2. The quantitation of AAs and dipeptides was conducted and good linearity (r² ≥ 0.997) and favorable repeatability (RSD ≤ 3.6%) were obtained. Furthermore, the proposed method was applied in determining the enantiomeric purity of AAs and dipeptides. Meanwhile, the possible enantiorecognition mechanism based on the synergistic effect of chiral metal complexes and γ-CD was explored and discussed briefly.     

Ultra-sensitive hydrazine chemical sensor based on high-aspect-ratio ZnO nanowires

High-aspect-ratio ZnO nanowires based ultra-sensitive hydrazine amperometric sensor has been fabricated which showed a high and reproducible sensitivity of 12.76 μA cm⁻² nM⁻¹, detection limit, based on S/N ratio, 84.7 nM, response time less than 5 s, linear range from 500 to 1200 nM and correlation coefficient of R = 0.9989. This is the first report in which such a very high-sensitivity and low detection limit has been achieved for the hydrazine sensors by using ZnO nanostructures modified electrodes. Therefore, this work opens a way to utilize simply grown ZnO nanostructures as an efficient electron mediator to fabricate efficient hydrazine sensors.     

Studies of magnetite nanoparticles synthesized by thermal decomposition of iron (III) acetylacetonate in tri(ethylene glycol)

In this paper, water-soluble magnetite nanoparticles have been directly synthesized by thermal decomposition of iron (III) acetylacetonate, Fe(acac)₃ in tri(ethyleneglycol). Size and morphology of the nanoparticles are determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements while the crystal structure is identified using X-ray diffraction (XRD). Surface charge and surface coating of the nanoparticles are recognized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectra (XPS) and zeta potential measurements. Magnetic properties are determined using vibrating sample magnetometer (VSM) and superconducting quantum interference device (SQUID) measurements. The results show that as-prepared magnetite nanoparticles are relatively monodisperse, single crystalline and superparamagnetic in nature with the blocking temperature at around 100 K. The magnetite nanoparticles are found to be highly soluble in water due to steric and electrostatic interactions between the particles arising by the surface adsorbed tri(ethyleneglycol) molecules and associated positive charges, respectively. Cytotoxicity studies on human cervical (SiHa), mouse melanoma (B16F10) and mouse primary fibroblast cells demonstrate that up to a dose of 80 μg/ml, the magnetic nanoparticles are nontoxic to the cells. Specific absorption rate (SAR) value has been calculated to be 885 and 539 W/gm for samples with the iron concentration of 1 and 0.5 mg/ml, respectively. The high SAR value upon exposure to 20 MHz radiofrequency signifies the applicability of as-prepared magnetite nanoparticles for a feasible magnetic hyperthermia treatment.     

Surface of Zn-Mn-O and its role in room temperature ferromagnetism: An XPS analysis

The existence of ferromagnetism in Zn-Mn-O semiconductor samples and dependence on the preparation condition were investigated. We systematically examined the samples with manganese concentration ranging from 0 to 10 at.%, prepared by a solid state reaction route using (ZnC₂O₄·2H₂O)_1−x and (MnC₂O₄·2H₂O)_x as precursors. Thermal treatment was carried out in air at temperatures ranging from 400 to 900 °C. The samples were investigated by X-ray diffraction, transmission electron microscopy, magnetization measurements and XPS spectroscopy. XPS surface composition, chemical analysis and depth profiling were successfully employed on powder revealing the chemical composition at the surface of the grains and underneath. The present investigation suggests that physical properties and observed room temperature ferromagnetism might be due to grain surface effects. It seems that the ferromagnetic phase is correlated with oxygen build up at the surface.     

A molecular dynamics simulation study on resonance frequencies comparison of tunable carbon-nanotube resonators

We investigated tunable gigahertz-resonators, which is based on the application of a telescoped double-walled carbon-nanotube that can be used repeatedly and operate at a single frequency or have a relatively narrow frequency range, via classical molecular dynamics simulations of a double-walled carbon-nanotube. Two types of telescoped double-walled carbon-nanotube resonators were compared with each other; one was bridge-type and another was cantilever-type, and one side was connected to a position controller in order to achieve a telescoped carbon-nanotube. The frequency bandwidth of our cantilevered type design can exceed that of the bridged type. Our simulations showed that such a system can tune it up its resonance frequency by controlling the length of oscillating carbon-nanotube resonator.     

Floating zone growth and compositional inhomogeneity study of La0.75Y0.05Sr0.2MnO3 single crystals

Single crystals of La_0.75Y_0.05Sr_0.2 MnO₃ have been grown by the floating zone technique. The yttrium distribution in the radial and axial directions in the crystals was studied for different growth rates. The sample grown at high rate showed inhomogeneity in the yttrium content in the growth direction, while the sample grown at relatively low rate was homogeneous in the growth direction, but demonstrated compositional separation between the Y-poor central part and Y-enriched peripheral part in the perpendicular plane. The compositional separation led to magnetic inhomogeneity.     

Preparation of indium sulfide thin films by spray pyrolysis using a new precursor indium nitrate

Indium nitrate and thiourea were used as the precursor solutions for preparing indium sulfide thin films using Chemical Spray Pyrolysis (CSP) technique. Films having various In/S ratios were characterized using X-Ray Diffraction (XRD), Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), optical absorption, transmission and photosensitivity measurements. Sample having In/S ratio 2/3 showed better crystallinity with band gap 2.66 eV. Depth profile of the sample also indicated the formation of indium sulfide. It was also observed that In/S ratio in the initial precursor solution determined the composition as well as electrical properties of the films. Maximum photosensitivity was observed for the sample prepared using solution having In/S ratio 2/4.     

Preparation and characterization of Cu-Cu2O cermet films

Metal-insulator composites (cermets) find use in a wide range of applications. In this paper the preparation of cermet films by dc reactive magnetron sputtering is presented. These cermets have been characterised by measuring their electrical resistance and the properties have been correlated to the microstructure and composition. Magnetron sputtering is found to be very effective in controlling the composition of the deposited films, enabling the preparation of films with tailored properties.     

Influence of isomorphous substitution in MFI-type materials on the diffusion of n-hexane: Molecular dynamic studies

Theoretical studies of the behaviour of an adsorption system MFI/n-hexane were performed with a molecular dynamic method. Investigation of influence of isomorphous substitution on diffusion coefficients was the main objective. It was found that the presence of metals other than silicon in the zeolite framework might cause an increase in the diffusion coefficients. However, it is small, independently of the adsorption level.