A full-duplex radio-over-fiber link with 12-tupling mm-wave generation and wavelength reuse for upstream signal

A full-duplex radio-over-fiber (RoF) link with a novel scheme to generate 60 GHz mm-waves from a 5 GHz RF signal source is investigated. In the RoF downlink, the required frequency of the RF oscillator is reduced greatly. Since the optical carrier is not modulated by downstream data, part of it is reused to carry upstream data and the upstream data is transmitted to the central station using optical single-sideband modulation. In this way, a single wavelength is used for both downstream and upstream transmissions. Based on this scheme, a full-duplex RoF link is built and its transmission performance is analyzed. Theoretical analysis and numerical simulation show that the downstream signal cannot only eliminate code form distortion caused by time shift of the code edges, but also reduce the influence of the fading effect as the 60 GHz DSB optical mm-wave signal is transmitted along the fiber, and the upstream signal is immune to both fading effect and time shift of the code edges.     

Simulative investigation the impact of optical amplification techniques on single- and dual-electrode MZM and direct modulator's in single-tone RoF system

Since the introduction of erbium-doped fiber amplifier (EDFA) in optical fiber communication systems at 1550 nm, the fiber loss is no longer considered as the limiting factor but the fiber dispersion and chirp parameters play an important role in degrading the performance of optical communication systems. Further, the invention of external modulators of Mach-Zehnder (MS) type minimizes the transmission power penalty due to fiber chromatic dispersion as these modulators are consider almost chirp-free modulators. Also, better suppression of nonlinear distortions consists of harmonic distortions (HDs) and intermodulation distortions (IMDs) were achieved by using Mach-Zehnder external modulator [8]. In this work, a simulation comparison of external- and direct-modulation schemes using different optical amplifiers; SOA and EDFA in single-tone RoF system is reported. A single-tone channel of 20 GHz is transmitted over single-mode fiber (SMF) either externally modulated by using single-electrode (SEMZM) - and dual-electrode (DEMZM) - Mach-Zehnder modulator or by direct-modulation scheme. Better improvements in the measurement of received RF power of a 20 km linked single-tone RoF system are achieved by using SEMZM with EDFA, which means maximum optical link is achieved between Central Office (CO) and Base Station (BS). Further, this scheme provides better BER as compare to other schemes discussed in this paper.     

DSB optical mm-wave with signal only on optical carrier generated by embedded LiNbO3 Mach-Zehnder modulator

We have investigated the generation of the 40-GHz double-sideband optical millimeter (mm)-wave with signal carried only by its optical carrier via an embedded LiNbO₃ Mach-Zehnder modulator (LN-MZM). Since the optical carrier and its two first-order sidebands are dominant and their powers are well balanced, the first-order harmonic in the photocurrent gets maximal. As the optical mm-wave signal is transmitted along the fiber, there is no code outline distortion because the signal is only modulated on the optical carrier. Although the first-order harmonic shows the periodical fading effect when the optical mm-wave signal is transmitted along the fiber, its degradation on the radio-over-fiber link can be avoided by adjusting the position of the fading nodes via varying the main MZM bias voltage, and the signal still keeps much good eye diagram even after 50-km fiber transmission. The experimental results prove our theory.     

Generation and transmission of the double-sideband optical millimeter-wave with signal carried only by optical carrier

In this paper, we have proposed a new scheme to generate double-sideband (DSB) optical millimeter-wave (mm-wave) with signal carried only by optical carrier, and its transmission performance is investigated. The theoretical and numerical results show that the DSB optical mm-wave signal generated by our scheme suffers only from the fading effect, the time shift of the sidebands has little influence on its transmission performance. The signal demodulated from the harmonic photocurrent shows a clear and open eye diagram and has good performance even if the transmission distance is very close to but not just at the fading nodes. The theoretical results are in good agreement with our numerical simulation.     

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators (DP-MZMs) is proposed. The proposed scheme is not sensitive to modulation index and relatively strong MMW signal with good radio frequency spurious suppression ratio (RFSSR) can be obtained without strict requirement on modulation index. Filterless feature makes the scheme quite suitable for wavelength division multiplexing (WDM) applications. For verification, a 60 GHz millimeter wave with 44 dB RFSSR is generated from a 7.5 GHz radio frequency wave by simulation. Performance of the proposed scheme has been characterized under different conditions including DC-bias drifts of MZMs, different amplitudes of RF inputs and different extinction ratios of MZMs.     

Impact of higher order dispersion on Photonically assisted optical millimeter-wave generated using dual parallel electro-optic modulators

In this work, Author investigated the impact of higher order fiber dispersion terms upto third order (3OD) on optical mm-wave generated using two parallel Mach Zehnder Modulators (MZMs). Individual and combined effect of the second order- (2OD) and third order-(3OD) is studied theoretically and experimentally. Expression of fiber dispersion for proposed model is derived using the method of expansion of Bessel function & Taylor series theory. Effect of RF-driven voltage applied to MZM is discussed and analyzed for Optical Sideband Suppression Ratio (OSSR) and Radio Frequency Spurious Suppression Ratio (RFSSR). The Q-factor, Bit Error Rate (BER) and Eye pattern are investigated for ITU's G.655 fiber. Experimental and simulation analysis verified the theoretical analysis.     

Performance limits of pico-cell systems using radio-over-fiber techniques with an electroabsorption modulator

We investigate the performance limits of a pico-cell system using the radio- over-fiber technique with an electroabsorption modulator (EAM) in a 2.4 GHz wireless local area network (WLAN) environment. To understand the performance limits of the system using an EAM as the optical transceiver, we vary the optical modulation index (OMI) of the transmitter for different bias voltages to the EAM. Power margins in the links are found to estimate a possible service range, and packet loss rates (PLRs) in the pico-cell system are measured to evaluate the transmission performance. The total service range can be extended up to 3 m by adjusting the OMI of the transmitter for different applied bias voltages to the EAM.     

Assessment of Fiber Chromatic Dispersion Based on Elimination of Second-Order Harmonics in Optical OFDM Single Sideband Modulation Using Mach Zehnder Modulator

This work addresses the analytical and numerical investigations of the transmission performance of an optical Single Sideband (SSB) modulation technique generated by a Mach Zehnder Modulator (MZM) with a 90° and 120° hybrid coupler. It takes into account the problem of chromatic dispersion in single mode fibers in Passive Optical Networks (PON), which severely degrades the performance of the system. Considering the transmission length of the fiber, the SSB modulation generated by maintaining a phase shift of π/2 between the two electrodes of the MZM provides better receiver sensitivity. However, the power of higher-order harmonics generated due to the nonlinearity of the MZM is directly proportional to the modulation index, making the SSB look like a quasi-double sideband (DSB) and causing power fading due to chromatic dispersion. To eliminate one of the second-order harmonics, the SSB signal based on an MZM with a 120° hybrid coupler is simulated. An analytical model of conventional SSB using 90° and 120° hybrid couplers is established. The latter suppresses unwanted (upper/lower) first-order and second-order (lower/upper) sidebands. For the analysis, a varying quadrature amplitude modulation (QAM) Orthogonal Frequency Division Multiplexing (OFDM) signal with a data rate of 5 Gb/s is upconverted using both of the SSB techniques and is transmitted over a distance of 75 km in Single Mode Fiber (SMF). The simulation results show that the SSB with 120° hybrid coupler proves to be more immune to chromatic dispersion as compared to the conventional SSB technique. This is in tandem with the theoretical analysis presented in the article.     

Power penalty in multitone radio-over-fibre system employing direct and external modulation with optical amplifiers

This paper presents a multitone RoF system employing a central station and a remote antenna station to transmit modulated microwave or mm-wave signals. Two configurations of the system employing direct and external modulation are presented. First, at the central station, the modulating signal is directly and externally modulated at 1549.5 and 1550.5 nm, respectively, and the combined signal is then transmitted using wireless mode. In the second configuration, the combined signal is transmitted over 20 km to the remote antenna station using optical fibre connectivity. At the remote antenna station, both channel wavelengths are separated and amplified with an EDFA and SOA and are detected. The demonstration results show that there exists a small power penalty between the direct and the external modulation. But a large power penalty is reported depending upon the choice of optical amplifier viz. EDFA or SOA. Better performance is recorded in later case. The results also show that power is being distributed among the operating frequency and sidebands adjacent to it after transmission over a fibre link.     

64 GHz optical millimeter-wave generation by octupling 8 GHz local oscillator via a nested LiNbO3 modulator

A novel scheme to generate a 64 GHz optical millimeter (mm)-wave via a nested LiNbO₃ Mach-Zehnder modulator with an 8 GHz local oscillator is proposed and simulated. Since the frequency response of the modulator and the local oscillator frequency are greatly reduced, the bandwidth requirements of the optical and electrical components in the transmitter are significantly decreased. The simulation results show that the generated optical mm-wave signal maintains good performance even after being transmitted over 20 km standard single-mode fiber.