Studies of magnetite nanoparticles synthesized by thermal decomposition of iron (III) acetylacetonate in tri(ethylene glycol)

In this paper, water-soluble magnetite nanoparticles have been directly synthesized by thermal decomposition of iron (III) acetylacetonate, Fe(acac)₃ in tri(ethyleneglycol). Size and morphology of the nanoparticles are determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements while the crystal structure is identified using X-ray diffraction (XRD). Surface charge and surface coating of the nanoparticles are recognized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectra (XPS) and zeta potential measurements. Magnetic properties are determined using vibrating sample magnetometer (VSM) and superconducting quantum interference device (SQUID) measurements. The results show that as-prepared magnetite nanoparticles are relatively monodisperse, single crystalline and superparamagnetic in nature with the blocking temperature at around 100 K. The magnetite nanoparticles are found to be highly soluble in water due to steric and electrostatic interactions between the particles arising by the surface adsorbed tri(ethyleneglycol) molecules and associated positive charges, respectively. Cytotoxicity studies on human cervical (SiHa), mouse melanoma (B16F10) and mouse primary fibroblast cells demonstrate that up to a dose of 80 μg/ml, the magnetic nanoparticles are nontoxic to the cells. Specific absorption rate (SAR) value has been calculated to be 885 and 539 W/gm for samples with the iron concentration of 1 and 0.5 mg/ml, respectively. The high SAR value upon exposure to 20 MHz radiofrequency signifies the applicability of as-prepared magnetite nanoparticles for a feasible magnetic hyperthermia treatment.     

The diffusion coefficient of a polymer in an array of obstacles is a non-monotonic function of the degree of disorder in the medium

Using Monte Carlo simulations, we have found that there is a surprising non-monotonic dependence of a polymer's diffusion coefficient upon the degree of disorder of the surrounding environment. Starting with a two-dimensional periodic lattice of obstacles, we randomly displace obstacles to create a quenched gel system with a tunable degree of disorder. Very small displacements increase the diffusion coefficient of polymers since they increase the width of the tube through which the polymer chains reptate. As we displace the obstacles further, however, entropic trapping is observed and the diffusion coefficient of the polymer decreases dramatically. This is a striking example of the delicate balance between entropic and frictional effects for a polymer diffusing in a dense system.     

Temperature dependence of photoluminescence in amorphous Si1-xCx:H films

We have investigated the temperature dependence of photoluminescence in hydrogenated amorphous silicon-carbon alloys a-Si_1-xC_x:H prepared by glow discharge in the low-power regime. The radiative recombination process, due to photocarriers trapped on band-edge states, is in competition with the thermal escape of the photocarriers into the mobility bands. The model gives a quantitative fit with experiment, without any adjustable parameter, provided the width of the band-edge distribution of states is taken as the width of the conduction band only (measured by “photo-induced infra-red spectroscopy”) and not as the Urbach energy, as it is usually assumed.     

Space-selective co-precipitation of silver and gold nanoparticles in femtosecond laser pulses irradiated Ag, Au co-doped silicate glass

We report on space-selective co-precipitation of silver and gold nanoparticles in Ag⁺, Au³⁺ co-doped silicate glasses by irradiation of femtosecond laser pulses and subsequent annealing at high temperatures. The color of the irradiated area in the glass sample changed from yellow to red with the increase of the annealing temperature. The effects of average laser power and annealing temperature on precipitation of the nanoparticles were investigated. A reasonable mechanism was proposed to explain the observed phenomena.     

Conceptual design of a phase-shifting telescope-interferometer

This paper deals with the theoretical principle and optical design of a phase-shifting telescope-interferometer. What is called a “telescope-interferometer” (T-I) is indeed a novel, recently proposed wavefront error (WFE) sensing technique, whose basic idea consists in combining the main pupil of a telescope with a second, off-axis reference arm. Then a weak modulation of the point spread function (PSF) is generated at the focal plane, allowing for direct phase measurements. We propose a notable improvement of the method, inspired from classical principles of phase-shifting interferometry. Herein are presented the alternative principle and its achievable measurement accuracy. The technique shows high performance excepted on narrow areas located near the pupil boundary. It is applicable to both ground or space telescopes and is suitable for the co-phasing of segmented mirrors, which is of prime importance in view of future giant telescope projects.     

Fabrication and magnetic properties of ordered Fe60Pb40 nanowire arrays electrodeposited in AAO templates

Ordered ferromagnetic-nonmagnetic heterogeneous Fe₆₀Pb₄₀ nanowire arrays were successfully fabricated by alternating current (AC) electrodeposition into nanoporous alumina templates. Transmission electron microscopy (TEM) image and selected-area diffraction (SAED) pattern analysis showed that the Fe₆₀Pb₄₀ nanowires are polycrystalline with an average diameter of 22 nm and lengths up to several micrometers. X-ray diffraction (XRD) observations indicated that α-Fe and fcc Pb phase coexist and do not form metastable alloy phase. The as-deposited samples were annealed at 200, 300, 400 and 500 ^°C, respectively. Magnetic measurements showed that nanowires have high magnetic anisotropy with their easy axis parallel to the nanowire arrays, and the coercivity of the samples increased with the annealing temperature up to 400 ^°C and reached a maximum (2650 Oe). The change of magnetic properties associated with the microstructure was discussed.     

Derivation of quantum yields for visible emission transitions of Sm in heavy metal tellurite glass

Under the pumping of violet lighting emitting diode, quantum yields for multichannel transition emissions have been determined in Sm³⁺-doped heavy metal tellurite glass for the first time. For the derivation, the necessary fluorescence spectra were measured and calibrated in an integrating sphere connected to a CCD detector with a 400 μm-core optical fiber. The spectral power distribution of the sample was derived from the measured spectra first, and then the quantum yields of the visible emissions of Sm³⁺ were calculated based on the distribution. The total quantum yield for four emission transitions of Sm³⁺ in visible region is 4.07%. Integrating sphere with a CCD detector is proven to be a reliable and reproducible method to characterize luminescence and laser materials.     

Fabrication and magnetic properties of amorphous Co0.71Pt0.29 nanowire arrays

Highly ordered Co_0.71Pt_0.29 alloy nanowire arrays have been fabricated successfully by direct current electro-deposition into the pores of a porous anodic aluminum oxide (AAO) template. SEM and TEM images reveal that the nanowires of array are uniform, well isolated, and parallel to one another. The aspect ratio of nanowires is over 200. XRD and EDS pattern indicates that amorphous Co_0.71Pt_0.29 structure was formed during electro-deposition. In amorphous sample, magnetocrystal anisotropy is very small, therefore, shape anisotropy plays a dominant role which leads to strong perpendicular anisotropy. High coercivity (Hc=1.7 kOe) and squareness (Mr/Ms) around 0.7 were obtained in the samples when the field was applied parallel to the axis of the nanowires. However, when it changed to polycrystalline structure after annealing, due to the competition of magnetocrystal anisotropy and shape anisotropy, the sample did not display perpendicular anisotropy.     

Amorphous BeN as a new solid host for rare‐earth‐related luminescent materials

Beryllium‐nitride (BeN) thin films were prepared by sputtering a Be target in an atmosphere of pure nitrogen. The films were doped with samarium simply by placing a piece of Sm metal on the surface of the Be target. Under these deposition conditions the films present an amorphous structure and an optical bandgap of approx. 4 eV. They also exhibit visible light emission due to Sm³⁺ ions as a result of either photon or electron excitation. The present experimental results show that amorphous BeN films are suitable, and efficient, III‐nitride hosts for rare‐earth doping purposes. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hybrid Deconvolution of Adaptive Optics Retinal Images from Wavefront Sensing

Adaptive optics can be used to compensate for the wave aberration of the human eyes to achieve high-resolution imaging in real time. However the correction ＆ partial due to the limitation of hardware. We propose a kind of hybrid image post-processing method, which uses the blind deconvolution combined with the residual data in wavefront sensor to restore the partially adaptive optics corrected retinal image. This method is applied in the image restoration of the vivid human retinal images. The results show that it is effective to improve the retinal image quality.