QSAR-based toxicity classification and prediction for single and mixed aromatic compounds

Quantitative structure-activity relationships (QSARs) based on the octanol/water partition coefficient were employed to predict acute toxicities of 36 substituted aromatic compounds and their mixtures. In this study, the model developed by Verhaar et al. was modified and used to calculate octanol/water partition coefficients of chemical mixtures. To validate the model, acute toxicities of these chemicals were measured to Vibrio fischeri in terms of EC⁵⁰. The results indicated that the obtained QSAR models could be used to predict toxicities of samples consisting of these substituted aromatic compounds, individually or in combinations. The obtained equations were proved to be robust enough by using the leave-one-out test method. By classifying these chemicals into two groups, polar and non-polar, the toxicities of chemical mixtures within each group can be predicted accurately from their calculated partition coefficients.     

Graphene‐sensitized microporous membrane/solvent microextraction for the preconcentration of cinnamic acid derivatives in Rhizoma Typhonii

A novel graphene‐sensitized microporous membrane/solvent microextraction method named microporous membrane/graphene/solvent synergistic microextraction, coupled with high‐performance liquid chromatography and UV detection, was developed and introduced for the extraction and determination of three cinnamic acid derivatives in Rhizoma Typhonii. Several factors affecting performance were investigated and optimized, including the types of graphene and extraction solvent, concentration of graphene dispersed in octanol, sample phase pH, ionic strength, stirring rate, extraction time, extraction temperature, and sample volume. Under optimized conditions, the enrichment factors of cinnamic acid derivatives ranged from 75 to 269. Good linearities were obtained from 0.01 to 10 μg/mL for all analytes with regression coefficients between 0.9927 and 0.9994. The limits of quantification were <1 ng/mL, and satisfactory recoveries (99–104%) and precision (1.1–10.8%) were also achieved. The synergistic microextraction mechanism based on graphene sensitization was analyzed and described. The experimental results showed that the method was simple, sensitive, practical, and effective for the preconcentration and determination of cinnamic acid derivatives in Rhizoma Typhonii.     

Characterization of Ascentis RP-Amide column: Lipophilicity measurement and linear solvation energy relationships

This study investigates lipophilicity determination by chromatographic measurements using the polar embedded Ascentis RP-Amide stationary phase. As a new generation of amide-functionalized silica stationary phase, the Ascentis RP-Amide column is evaluated as a possible substitution to the n  -octanol/water partitioning system for lipophilicity measurements. For this evaluation, extrapolated retention factors, log k^′_w$\text{log}{k^{\prime }}_w$, of a set of diverse compounds were determined using different methanol contents in the mobile phase. The use of n-octanol enriched mobile phase enhances the relationship between the slope (S  ) of the extrapolation lines and the extrapolated log k^′_w$\text{log}{k^{\prime }}_w$ (the intercept of the extrapolation), as well as the correlation between log P   values and the extrapolated log k^′_w$\text{log}{k^{\prime }}_w$ (1:1 correlation, r² = 0.966). In addition, the use of isocratic retention factors, at 40% methanol in the mobile phase, provides a rapid tool for lipophilicity determination. The intermolecular interactions that contribute to the retention process in the Ascentis RP-Amide phase are characterized using the solvation parameter model of Abraham. The LSER system constants for the column are very similar to the LSER constants of the n-octanol/water extraction system. Tanaka radar plots are used for quick visual comparison of the system constants of the Ascentis RP-Amide column and the n-octanol/water extraction system. The results all indicate that the Ascentis RP-Amide stationary phase can provide reliable lipophilic data.     

The aggregation of the sodium dodecyl sulfate –n - octanol–water system at low concentration

Micelle formation in sodium dodecyl sulfate (SDS)–n-octanol mixtures was studied by several techniques and the results were interpreted using regular solution theory for mixed-micelle formation. Octanol was considered as a nonionic surfactant. The composition of micelles at the critical micelle concentration (cmc) was computed together with the interaction parameter and the activity coefficient of the components of the micelles. The fluorescence quenching technique with pyrene was employed to obtain the SDS and octanol aggregation numbers at the cmc. The results were in agreement with similar studies on other alcohol–SDS systems. At the cmc spherical, almost fully ionized micelles formed, while at a higher concentration there was a transition to anisometric (probably rodlike) micelles which pushed sodium counterions into their Stern double layer. Mixed anisometric micelles were more ionized than pure SDS micelles. When the octanol:SDS total ratio exceeded 0.85:1, an emulsion of octanol appeared in equilibrium with the micelles. Received: 23 December 1998 Accepted in revised form: 3 March 1999     

Water‐Dragging Ability of Aromatic Compounds in Octanol‐Water Systems: A Quantitative Approach by Spectra Deconvolution

This is the first time that the water‐dragging ability of aromatic compounds partitioning in octanolwater biphasic systems is experimentally estimated by a quantitative spectral deconvolution model. The water‐dragging amount, Δ f value, measured by the quantitative model is based on the integrations of peak area increments of component peaks deconvoluted from O‐H modes of water and octanol molecule, recorded by a Fourier‐transformed infrared spectrophotometer. The stoichiometry hydration capacity, Δ fw, is derived from the corresponding Δ f values. Without any tedious experimental procedure or complicated modeling calculation, the Δ fw value is able to give the required solute‐water hydration information. Such an advantage can't be provided by other techniques applied in the field of water‐dragging ability investigation. Six aromatic compounds were used for the method validation. The Δ fw data obtained by this model are generally consistent with literature‐known values. The efficiency of this quantitative spectral deconvolution model can solve the state of aggregations and the structure of hydrates existing in the organic phase. Moreover, this deconvolution model also has the ability to be extended further to investigate the environmental and biological problems related to the organic chemical portioning in the aqueous and non‐aqueous phases.     

Mixed Oxides FeVOx for Selective Oxidation of Octanol to Octanal under Solvent‐free Condition

The two‐component mixed oxides FeVO_x with various molar ratio of Fe to V were prepared and their phase composition, structure and morphology were determined by XRD and SEM. This prepared material was employed for liquid‐phase oxidation of octanol using H₂O₂ as oxidant. The mixed oxide FeVO_x with 2.5 : 1 of Fe to V molar ratio was found to be an effective catalyst with high selectivity to octanal under solvent‐free condition. The relationship between the catalytic performance and phase compositions of the mixed oxides was investigated by the test of its activity and XRD characterization. The catalytic action of the active sites including redox and acidic sites formed by interaction between VO_x and FeO_x on the surface of the catalyst was discussed. The catalyst was easily recovered and reused.     

Determination of bisphenol A in thermal printing papers treated by alkaline aqueous solution using the combination of single‐drop microextraction and HPLC

A method for the quantitative determination of bisphenol A in thermal printing paper was developed and validated. Bisphenol A was extracted from the paper samples using 2% NaOH solution, then the extracted analyte was enriched using single‐drop microextraction followed by HPLC analysis. Several parameters relating to the single‐drop microextraction efficiency including extraction solvent, extraction temperature and time, stirring rate, and pH of donor phase were studied and optimized. Spiked recovery of bisphenol A at 20 and 5 mg/g was found to be 95.8 and 108%, and the method detection limit and method quantification limit was 0.03 and 0.01 mg/g, respectively. Under the optimized conditions, the proposed method was applied to the determination of bisphenol A in seven types of thermal printing paper samples, and the concentration of bisphenol A was found in the range of 0.53–20.9 mg/g. The considerably minimum usage of organic solvents (5 μL 1‐octanol) and high enrichment factor (189–197) in the sample preparation are the two highlighted advantages in comparison with previously published works.     

Properties of subcritical water as an eluent for reversed-phase liquid chromatography—Disruption of the hydrogen-bond network at elevated temperature and its consequences

The use of subcritical water as an eluent for reversed-phase liquid chromatography is further explored. Shape selectivity as well as thermodynamic values for solute transfer were measured and compared to those seen with traditional ambient methanol/water and acetonitrile/water mobile phases. Linear solvation energy analysis was also used to analyze extrapolated values of the retention factor in pure water at ambient temperatures (k^′_w${k^{\prime }}_w$) for subcritical water and ambient hydroorganic mobile phases. Results indicate that it is likely that a large disruption in the hydrogen-bonding network of water at high temperatures causes unique chromatographic selectivity, as well as prohibits accurate extrapolation from high temperature to ambient conditions using pure water. Additionally, subcritical water was not found to be a suitable mobile phase for determining k^′_w${k^{\prime }}_w$ for use in estimating octanol/water partition coefficients.