A new generation of visible-light-active photocatalysts—The alkaline earth metal bismuthates: Syntheses,compositions, structures,and properties

Semiconductor materials containing bismuth have attracted the attention of researchers over the past several decades, as a result of their high photocatalytic activity in various reactions and/or high efficiency in their photoelectric conversion of solar energy. This interest originated from the observations that bismuth-containing semiconductors have a sufficiently small bandgap, which makes them sensitive to radiation in the visible spectral range; thus, visible-light-active materials. Among the various bismuth-containing semiconductor materials, the bismuthates of alkaline earth metals are distinguished and describe into separate groups. This article reviews research on the known methods of obtaining bismuthates of various alkaline earth metals (magnesium, calcium, strontium, and barium), and further analyzes their composition, structure, and visible-light-active photocatalytic activity.     

Correlation between Boron Isotope of Coral Acropora and pH Value of Seawater Surface

A water circulation system with the almost same element composition and socket type was adopted in coral Acropora culture under different seawater pH value conditions and the data of the relationship between boron isotopic compositions of coral and seawater pH value by thermoelectric ionization mass spectrometer were obtained. According to the correlations between α_carb-3 of coral and the pH value of cultured seawater, α_carb-3 was not a constant but related to pH value, indicating that B(OH)₃ also incorporated carbonate. Therefore, the theoretical formula could not be used to calculate the seawater pH value from the δ¹¹B_carb value of the measured marine biological carbonate. The empirical equations obtained experimentally would be an alternative method to calculate the seawater pH value. In addition, the mixed precipitation of CaCO₃ and Mg(OH)₂ was found in aquaculture tanks with high pH value, and the δ¹¹B of the solid was significantly higher than that of cultured seawater. The result indicated that the presence of Mg(OH)₂ had a significant effect on the boron isotope fractionation, which deserved our attention.     

Nitrogen Plasma Enhanced Low Temperature Atomic Layer Deposition of Magnesium Phosphorus Oxynitride (MgPON) Solid-State Electrolytes

Solid-state batteries (SSBs) that use solid electrolytes instead of flammable liquid electrolytes have the potential to generate higher specific capacity and offer better safety. Magnesium (Mg) based SSBs with Mg metal anodes are considered to be one of the most promising energy storage candidates, because it gives high theoretical volumetric capacities of 3830 mAh cm⁻³. Here, we demonstrate an atomic layer deposition (ALD) process with a double nitrogen plasma process that successfully produces nitrogen-incorporated magnesium phosphorus oxynitride (MgPON) solid-state electrolyte (SSE) thin films at a low deposition temperature of 125 °C. The ALD MgPON SSEs exhibit an ionic conductivity of 0.36 and 1.2 μS cm⁻¹ at 450 and 500 °C, respectively. The proposed ALD strategy shows the ability of conformal deposition nitrogen-doped SSEs on pattered substrates and is attractive for using nitride ion-conducing films as protective or wetting interlayers in solid-state Mg and Li batteries.     

Polymer Electrolytes – New Opportunities for the Development of Multivalent Ion Batteries

Batteries, as highly concerned energy conversion system, have a great development prospect in various fields, especially in the field of energy powered vehicles. Multivalent ion batteries are getting more attention due to their low cost, high abundance in earth crust, high capacity and safety compared with Lithium batteries. Despite above advantages, several problems still need to be solved before multivalent ion batteries achieve large-scale application, such as interfacial parasitic reaction, anode passivation, and dendrites. The replacement of liquid electrolytes with gel polymer electrolytes (GPEs) which pose high safety, high mechanical strength and simplified battery system, is an effective strategy to inhibit dendrite growth and improve electrochemical performance. This review mainly discusses the advantages and challenges of multivalent ion batteries including zinc, magnesium, calcium and aluminum batteries. Meanwhile, the major targets of this review are introducing the recent developments and making a summary of the future trends of GPEs in the multivalent ion batteries.     

Synthesis and Structural Characterization of Some New Magnesium Formamidinates

[Mg(Form)₂(THF)] [Form = bis(2,6‐dimethylphenyl)formamidinate (XylForm) ( 1 ), bis(2,6‐diethylphenyl)formamidinate, (EtForm) ( 2 ), bis(2,6‐diisopropylphenyl)formamidinate (DippForm) ( 3 )] are conveniently synthesized by treating bis(2,6‐dimethylphenyl)formamidine, bis(2,6‐diethylphenyl)formamidine, or bis(2,6‐diisopropylphenyl)formamidine, respectively, with half an equivalent of dibutylmagnesium in THF. Compounds 1 – 3 are mononuclear species in the solid state with five coordinate central metal atoms. The ¹H NMR chemical shift of the formamidinate formyl proton exhibits a correlation with ligand sterics wherein increasing bulk leads to a shift to higher field.     

Flammability characterization and effects of magnesium oxide in halogen-free flame-retardant EVA blends

The effects of magnesium oxide(Mg O) on the flame retardant performance of intumescent systems based on ammonium polyphosphate(APP) and pentaerythritol(PER) in ethylene vinyl acetate copolymer(EVA) were studied. The results showed that Mg O affects both the quality and quantity of residual char. There is an optimal value for the loading amount of Mg O. More or less Mg O loading may cause the formation of defective char layers and worsen the flame retardancy of EVA. According to the results of limiting oxygen index(LOI), vertical flammability test(UL94 rating) and cone calorimetry(CONE), the best flame retardancy with a strong and well intumescent char is obtained from the sample with 1 wt% of Mg O, which has the highest LOI value of 27.9, UL94 rating of V-0 and the lowest peak heat release rate of 242 k W·m?2.     

30℃时MgCl2-MgSO4-CH3CH2OH-H2O四元体系液固相平衡的研究

采用等温法测定了30℃时Mg Cl2-Mg SO4-CH3CH2OH-H2O四元体系及边界三元体系Mg Cl2-CH3CH2OH-H2O和Mg SO4-CH3CH2OH-H2O的相平衡数据,绘制了相图并划分了相应的结晶区。实验结果表明,随着乙醇-水体积比不同,四元体系Mg Cl2-Mg SO4-CH3CH2OH-H2O出现了不同的结晶区,随着乙醇含量的增加,Mg Cl2和Mg SO4的溶解度越来越小,不饱和区越来越小,体系中平衡固相的结晶水含量越来越低,说明乙醇具有一定的盐析作用和脱水作用。当乙醇-水体积比为5∶5时,是获得镁盐的最佳比例。这为芒硝和白钠镁矾共生矿中镁盐的分离和提纯提供基础的理论数据。     

六偏磷酸钠对AZ31镁合金电化学行为的影响

为提高AZ31镁合金阳极的活化性能以及抑制它的腐蚀,用电化学等方法研究了在中性3.5%Na Cl体系中,六偏磷酸钠(Na6(PO3)6)对AZ31镁合金电化学行为的影响。结果表明:Na6(PO3)6能大幅度抑制AZ31镁合金的腐蚀,但极化程度有所增大。当Na6(PO3)6的质量分数为2.0%时,AZ31镁合金的缓蚀率高达74.9%,腐蚀后其表面均匀,且活化性能有所改善,在-1.10V处时合金的电流密度高达0.033 m A.cm-2,开路电位Eocp负移程度最大(-1.59 V),活化电位Eact负移程度最大(-1.38 V)。试验结果为AZ31镁合金作为电极材料提供了参考。     

飞秒激光冲击AZ31B镁合金过程的数值模拟

采用有限元分析法对飞秒激光冲击AZ31B镁合金进行数值模拟,研究了激光冲击处理对镁合金变形过程的影响,分析了单脉冲激光冲击下材料内部的位移、动能、应力和应变的分布情况,得到了材料的瞬态速度和应变率变化过程.仿真结果表明,单脉冲飞秒激光冲击镁合金产生的塑性变形,可在材料表面形成微米级凹坑,中心点处最大位移为34μm,最大变形速度390m/s;在冲击初期,材料表面的应力和应变主要分布在冲击区域中心节点和边缘附近,并且得到镁合金的最大应力和最大应变率分别为955 MPa和1.8×106 s-1.研究结果能够为深入分析飞秒激光与镁合金作用时材料变形参量的变化规律提供数值理论依据.